Sound Devices PIX 240 Video Recorder Firmware 3.53

Fixes:

- Rare image complexity issues could cause dropped or corrupt frames.
- Some OWC Mercury Extreme Pro 6G SSDs were failing to format, and reporting "Format failed."

Prepare to Update:

- Download the firmware's .zip file.
- From the zip archive, extract the .prg file.
- Copy the .prg file to the root level of an SSD in a PIX-CADDY, CF memory card or HDD. The card or SSD must be formatted as an exFAT volume. (The storage medium should be formatted by PIX.)
- Power the recorder from external DC. Do not perform the update with an unstable power source.
- Insert the SSD, CF card or HDD with the .prg file.
- Power on the recorder.
- Once booted, push the MENU button to open the Main Menu. Turn the Control knob to highlight System, and then press the Control knob to select it.
- Turn the Control knob to highlight Update Software, and then press the Control Knob to select it.
- Once a prg has been selected, you will need to reconfirm that the file selected is the correct one. Select Yes to proceed with the firmware update or select No to exit the Software Update. The unit will take a few minutes to update the firmware, indicating its progress. When the update is finished, the unit will present a dialog indicating it will shut down. Accept this dialog to complete the update process.
- Review settings after updating.

About DJ Mixers:

Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.

However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).

This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device.