Sound Devices 664 Field Mixer Firmware 2.11

New:

- Added QR Codes for smart phone access to online documentation including Approved Media List and User Guide. A QR code reader app is required.
- New User Bit mode allows jamming of External Timecode User Bits.

Support for the new CL-12 Linear Fader Controller, including:

- 12 100 mm linear input faders (Penny & Giles option with CL-12 Alaia)
- L, R, X1, X2 level control, routing, arming, and 22-segment metering inc. limiter activity
- 1 Com private line circuit
- Numerous quick-access buttons to key functions inc. metadata, transport, TC, coms/returns, arming, routing, etc.
- USB ports for keyboard and lamp
- Three user-programmable buttons
- A new CL-12 sub-menu
- Note: Not included with the CL-12, a micro USB power cord (5V) must be connected to the CL-12 DC Power Boost port in order to operate with the 664.

Fixed:

- In the File List, FAT32 media files would incorrectly display modified time instead of creation time.
- Previously, there was a date corruption issue with ExFAT formatted media containing more than 200 files.
- Keyboard sequence involving Shift key would sometimes repeat the same character as if the key was being held down.
- Lock up when adding notes exceeding the 200 character limit.
- Scene name shortcut (HP + RTN) editing factory the "None" option option causing "None" to disappear and breaking Scene Increment Mode.
- When UBits are set to one of the date modes the UU field metadata stamps were following the take number.
- UBits UU fields are now restored after loading user setup files.
- Added a recheck of the real time clock to prevent false “System date error detected. Please reset time and date.” messages from appearing at boot up.

Prepare to Update:

- Download the 664 firmware file.
- From the zip archive, extract the file within. Copy this .prg file to the root level of an approved SD or CF memory card. Do not place the file in any folder. Do not place the zip file on the SD or CF card. The card must be formatted in the 664.
- Apply Update to 664.
- Power the 664 from external DC. Do not perform the update with low batteries or unstable power sources.
- Power down the 664 if it is already powered up.
- Insert the SD or CF card with the .prg file.
- Power on the 664.
- Navigate to Setup Menu option SYSTEM > Update Firmware and follow the on-screen instructions.
- When the update is complete the 664 will power cycle itself. The version number will be displayed briefly on the splash screen while booting up. A message box appears "Firmware updated successfully Version: XXX". Press "OK". Please note any changes or additions to the Setup Menu (if applicable).

About DJ Mixers:

Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.

However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).

This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device.