Grandstream GWN7660LR Access Point Firmware 1.0.25.7

Changes:

- Increased PPSK profiles.
- Increased the client expiration time to 30 days.
- Added device name in syslog messages.
- Added 80MHz channel width in Indonesia country for the 5G band.
- Added support for timestamp and security signature on the URL redirect.
- Fixed radio configuration about DFS channel does not take effect.
- Fixed slave AP automatically factory reset when transferring to the Manager.
- Fixed obscured characters from the schedule name
- Modified the countermeasure prompt.
- Fixed terminal VLAN ID and downlink PVID intercepts issue when they are different.
- Fixed GWN menu “Error received: -16”.
- Fixed the network card status switches multiple times after first pairing.
- Fixed client not getting any IP when the configured VLAN ID is set to 2.
- Fixed RE slow issue when connected to it, also fixed the RE disconnected issue when acquiring IP.
- Fixed physical port VLAN tag does not work issue.
- Fixed wrong LED test light status issue.
- Fixed 5G TX power test failed issue.
- Fixed AP CPU temperature consistently display as 20°C issue.
- Fixed “5G channel automatically switched from 6 to 161” prompt issue when switching SSID from dual to 5G.
- Fixed not receiving alarm notification after changing alarm setting frequently.
- Fixed AP not responding to cloud after receiving the distributed configuration.
- Fixed the alert settings “AP channel automatically switched” should not contain channel 0 issue.
- Fixed the password authenticate fails when set above 11 digits.
- Fixed DHCP relay feature unusable when switched the primary device.
- Fixed the voucher status displayed issue.
- Fixed unable to kick out the terminal connected to slave issue.
- Fixed the LED light turns on too slow issue after powering up.
- Fixed AP keeps rebooting when there are too many SSIDs in the environment.
- Fixed slave AP reboot and generate panic core issue.
- Fixed network loop occurs issue.
- Fixed secondary channel set lower than main channel but still displayed wrong in the AP channel list issue.
- Fixed devices automatically reboot when associated with 2.4G band.
- Fixed devices crash after receiving the configuration from the cloud.
- Fixed “Error” prompt when acquiring logs after adding devices onto cloud.
- Fixed Honeywell thermostats not connecting issue.
- Fixed the wireless device cannot obtain IP address issue when enabling DHCP service.

About VoIP Phone Updates:

Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.

One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.

Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.

Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don't launch standalone update packages.

Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.

If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.