NVIDIA SHIELD Family ADB USB Driver 2

Official NVIDIA SHIELD family Windows USB Driver. Supports SHIELD TV (2017), SHIELD ANDROID TV (2015), SHIELD tablet and SHIELD portable. Required for PC to recognize device and use with Android Debug Bridge (ADB) and AndroidWorks. Supports Windows XP, Vista, 7, 8.x and Windows 10.

To install drivers, do the following:

1. It is recommended that the user re-scan their device list.
2. Locate the device in the hardware list. Typically it will have a yellow triangle with an explanation point on it indicating that it is not fully recognized yet. Note: The device's name may appear different between standard Android Debugging Interface mode and Boot Loader Interface or fastboot mode. The device will not appear as fastboot, unless it has been specially booted into this mode.
3. Right-click on the device and select to update the drivers.
4. Select Browse my computer for driver software.
5. Select Let me pick from a list of device drivers on my computer.
6. Select Have Disk….
7. Select Browse.
8. Navigate to the driver folder:
- If you are using Windows 8: C:NVPACKDriversWin8
- If you are using Windows 7, Vista, or XP: C:NVPACKDriversWin7+Vista+XP
9. Select android_winusb.inf.
10. If the device appears as FastBoot or Android Bootloader Interface, then select Android Bootloader Interface. Otherwise select Android Composite ADB Interface.
11. If you are using Windows 8, you will receive a warning that this driver may not be compatible with the device. Select yes to continue. This issue will be fixed in future releases.
12. If you are using Windows 7, Vista, or XP, you may receive a warning that the driver is not signed. Select yes to continue. This issue will be fixed in future releases.

About Tablet USB Drivers:

When tablets, e-readers or similar devices are connected, Windows platforms usually apply a generic driver that allows the system to recognize the device, exchange files, and make use of basic functions. Still, to use the full range of features available, proper USB drivers must be installed.

The installation procedure shouldn't be much of a hassle since each manufacturer intends to make it as easy as possible. So all you have to do is make sure that the current version is compatible with the product(s) you own, such as computer OS, tablet model, USB technology, run the setup, and follow the instructions displayed on-screen.

Bear in mind that, even if other OS might be suitable, we do not recommend that you apply this release on platforms other than the highlighted ones. Also, after the installation is complete, you should perform a system reboot so that all changes take effect properly.

That being said, click the download button, get the package and apply it on your system. In addition to that, check our website constantly to stay “updated one minute ago.”