ECS GF8100VM-M5 (V1.0) VIA HD Audio Driver 7100b

Note

: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
- AM3 Ready

CHIPSET
- NVIDIA GeForce 8 Series

GRAPHICS
- On Chip ( NVIDIA GeForce8100 based with 2D/3D graphic engine)
- Integrated DirectX 10 graphics processor
- Share Memory: Maximum up to 512MB

MEMORY
- Dual-channel DDR2 1066 memory architecture
- 2 x 240-pin DDR2 DIMM socket support up to 16 GB
- Support DDR2 1066/800/667/533/400 DDR2 SDRAM

EXPANSION SLOT   
- 1 x PCI Express x16 Gen2.0 slot (Support Hybrid SLI)
- 2 x PCI Express X 1 Gen1.1 slot
- 1 x PCI slot

STORAGE
- Support by NVIDIA MCP78V
• 2 x Ultra DMA133/100/66 devices
• 6 x Serial ATA 3.0Gb/s devices
- RAID0, RAID1, RAID0+1, RAID5 configuration

AUDIO
- VIA VT1708B
- Compliant with 6ch HD audio specification

LAN
- Realtek RTL8201N 10/100 PHY

REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x VGA port
- 1 x COM Port
- 4 x USB ports
- 1 x Ethernet Port
- 1 x Audio port (Line-in, Line-out, Mic-in)

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin 12V Connector
- 1 x 4pin CPU_FAN connectors
- 1 x IDE connector
- 1 x 3-pin SYS_FAN connector
- 1 x FDD connector
- 1 x LPT header
- 6 x Serial ATA 3Gb/s connectors
- (SATA5 & 6 only can work under AHCI or RAID mode due to NVIDIA chipset limitation)
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1x CD in header
- 4 x USB headers
- 1 x CLR COMS

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI
- Supports ACPI 3.0 revision

FORM FACTOR
- MATX Size, 244mm*214mm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.