Panasonic DC-GH6 Camera Firmware 2.3

RAW video output over HDMI to Blackmagic Design external recorder:

- [5.7K] / [C4K] / [Anamorphic (4:3) 5.8K] / [Anamorphic (4:3) 4.4K] 12-bit RAW video data can be output over HDMI to Blackmagic Video Assist 5" 12G HDR and Blackmagic Video Assist 7" 12G HDR, to be recorded as Blackmagic RAW.
- DaVinci Resolve or DaVinci Resolve Studio is required to play back and DaVinci Resolve Studio to edit Blackmagic RAW data.
- Please refer to the Blackmagic Design website for the information on the corresponding firmware version of Blackmagic Video Assist 5" 12G HDR and Blackmagic Video Assist 7" 12G HDR.
- All functions may not be available depending on the situation.
- When recording in C4K 120p/100p or 5.7K 60p/50p, constant bitrate 5:1 or less is recommended for SSD recording and 8:1 or less for SD card recording.

4K120p/100p video output over HDMI:

- When video quality is set to C4K 120p/100p or 4K 120p/100p, video output to an external device over HDMI at C4K 120p/100p or 4K 120p/100p is possible.
- [Power Save Live View] function has been added.

Improved external SSD recording function:

The following format can be selected to record to an external SSD when Panasonic AC adaptor (DMW-AC10, optional) and DC Coupler (DMW-DCC17, optional) is connected.
- [Rec Quality] with a high frame rate video exceeding a recording frame rate of 60.00p.
- [Variable Frame Rate] exceeding a frame rate of 60fps.

Others:

- [Video Repair] function has been added.
- Improved operational stability.

Update Procedure:

- Charge the battery fully.
- Make sure to turn off the power switch.
- Insert the fully charged battery to the body.
- Save and unzip the downloadable package.
- Transfer the content onto a formatted SD memory card.
- There are two firmware files that have been unzipped. Be sure to copy both files to the memory card.
- Insert the Card into the camera body.
- Turn on the power switch.
- Press [MENU/SET] button.
- Select [Firmware Version] in the [Setup] menu, then select [Firmware Update].
- After the "PLEASE WAIT ..." message disappears, select "Yes" and then press [MENU/SET] button.
- Firmware updating starts.
- While updating, the power is turned on and off several times (the screen will dim several times).
- Once the firmware update is completed, the camera will automatically turn the power off and on, and will be in a condition ready for shooting.

Important Notes:

- Do not turn the power off and on
- Do not press any buttons
- Do not open the SD memory card compartment
- Do not remove the SD memory card
- Do not remove the lens. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.