Panasonic AK-HRP1000 Remote Operation Panel Firmware 2.00

Changes:

- IP connection via global network is supported.
- Setting of COLOR TEMP, GAIN R, AXIS G and GAIN B to assign to the button in ECC menu
- Camera numbers can be changed when these cameras are in the control of CCU.

Version display method:

- Supply the power to AK-HRP1000 by connecting to AK-HC5000/UC3000, AK-UCU500, or PoE HUB.
- Press the MENU button. The TOP menu screen of ROP menu appears.
- Select “ROP SETTING” by turning the MENU dial D and press the MENU dial D to open the ROP SETTING menu.
- When turning MENU dial D, SYSTEM version and each Software version can be confirmed.

Update procedure:

- Insert the SD memory card into the SD memory card slot.
- Supply the power to AK-HRP1000 by connecting to AK-HC5000/UC3000, AK-UCU500, or PoE HUB.
- Press the MENU button. The TOP menu screen of ROP menu appears.
- Select “ROP SETTING” by turning the MENU dial D and press the MENU dial D to open the ROP SETTING menu.
- Select “UPGRADE” by turning the MENU dial D.
- Select “YES” by turning the MENU dial A, and press the MENU dial A. Confirm dialog appears.
- Select “Yes (ENC3)” by turning the MENU dial D. (Pressing the MENU dial D while “No (EXIT)” is selected, the update will be cancel.)
- When pressing the MENU dial C or D, the update will start. Software update takes approx. 3min. Do not power down while updating.
- When the update is completed, the message “COMPLETE” is displayed.
- When pressing the MENU dial C or D, ROP will reboot automatically.

About Camera Adapter Updates:

Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.

Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider applying the new firmware, even if you are a power user.

If you try to perform the update without knowing all the steps, you risk ending up with a broken device. However, what every upgrade needs is a compatible firmware to be transferred to the adapter (or to the camera) via either a USB cable or a suitable memory card.

That being said, if you consider applying this release and have made sure you’re properly informed on the process of performing the upgrade successfully, hit the download button, and update your camera adapter.

Check with our website as often as possible in order to be up to date with the latest releases.