Panasonic AK-HCU250 Camera Control Unit Firmware 05.24

Changes:

- A communication error may occur with the ROP connected by the serial protocol.
- The return image of the Level-B signal may not be displayed correctly.

Version display method:

- Connect the picture monitor to [8/PM] of HD/SD SDI OUT connector.
- Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
- Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
- Select “VERSION” and pressing the SELECT dial button, VERSION screen is displayed.
- Each software version is displayed on the VERSION screen as follows.

Update procedure:

- Connect the picture monitor TV to [8/PM] of HD/SD SDI OUT connector.
- Insert a SD memory card into the SD memory card slot.
- Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
- Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
- Select item “SD CARD” and press the SELECT dial button to open the SD CARD menu screen.
- Select the item “UPDATE” and set “YES?”(Character is blink).
- Pressing the SELECT dial button, update program is started and following message is displayed.
- Software update may take approx. 2 hours if the all FPGA and CPU are needed to be updated. Do not power down while updating.
 - When the update is completed, the message “UPDTAE COMPLETE” is displayed and CCU will be automatically rebooted 

About Integrated Web Camera Updates:

Enabling your embedded web camera by installing appropriate software will allow your system to capture and send images through a computer network, and include support for various features that the webcam benefits from.

In addition to that, updating the software on your device can fix various problems that might be encountered during the product's lifetime, and improve existing features like image quality, or add support for new ones.

When it comes to the installation process, the steps are very simple, as each manufacturer tries to make them as easy as possible, so that every user can perform the update on their own – simply run the package and follow the on-screen instructions for a complete installation.

Therefore, if you consider applying this package, hit the download button, and install it on your computer. Moreover, constantly check with our website in order to make sure that you don't miss a single new release.