SIGMA 60-600mm F4.5-6.3 DG DN OS L-Mount Lens Firmware 04

Changes:

- Supports Leica Extender L 1.4x by Leica Camera AG

Before Updating:

- This firmware is for L-Mount only.
- Please ensure that the firmware of the camera body is updated to the latest version.
- Use a fully charged battery or connect the camera to the AC adapter.
- Do not disconnect the battery or the AC adapter during the firmware update of the lens.
- Ensure the power of the camera is always kept ON during the firmware update of the lens.
- The lens needs to be attached to a camera to update the firmware.
- The following procedure is to update the lens firmware via SIGMA fp. For firmware updates of Leica and Panasonic L-Mount cameras, please follow the instruction manual for each camera.

Firmware Update:

- Prepare SD/SDHC/SDXC card and format in camera.
- Insert the SD/SDHC/SDXC card with the firmware to the camera and turn on the power.
- Press the MENU button on the back side of the camera body and open the setup menu.
- Select “Update Firmware” and select “OK”.
- After selecting the OK button, “Camera” and “Lens” appears on the display. Please select “Lens”.
- The message “Start firmware update?” will appear on the display.
- Select “Yes” to start the firmware update. Shortly the update will start.
- 「When “Firmware update is complete. It will restart automatically” is displayed, the update is complete.
- Check the “Information” version in the setup menu and confirm the lens version is updated.

About Lens Updates:

Upgrading or downgrading your lens to a different firmware version might enhance the unit's overall performance and stability, and could also improve some of the lenses' features (a good example would be faster autofocus speed).

In order to apply a firmware properly, other than the one already installed, you should check that the lenses are connected to the camera body, copy the compatible update on a memory card, and insert it into the camera.

From the device's menu, browse to the Firmware Upgrade section, and enable the new firmware. Since each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, you must make sure that you read the product's installation guide.

Therefore, if you consider installing this present release, click on the download button to get the firmware, and apply it. Moreover, don't forget to check our website constantly so that you don't miss any of the future versions.