Atomos Ninja Flame Recorder Firmware 7.10

Features:

- Added HDR support for log video from JVC and Red cameras.
- Improved accuracy for the color gamut.
- PQ input can now be selected for AtomHDR monitoring and grading from NLEâ€s with ST2084 output.
- PQ output has been added for playout to HDR monitors and televisions.
- Improvements to accuracy and resolution in blacks when using AtomHDR mode.
- A visual improvement has been made to the AtomHDR slider for easier access.
- While in AtomHDR mode, a simplified HDR waveform line has been added to easily set the correct slider position for the dynamic range of the scene.
- New options for AtomHDR include WFM Auto which automatically setting the HDR level for the current sceneâ€s max brightness and WFM HDR which scales the WFM to view the HDR range to the full height of the WFM.
- The waveform monitor will now display a percentage scale based on the input log mode.
- Slow motion is now available in playback mode. Pausing video playback will automatically display the slider above playback controls and give you access to forward and reverse speed adjustments.
- From the Battery page, there is now the option to manually override battery selection. This is designed to be used for the Atomos Power Station or other external power solutions.

Bug Fixes:

- Fixed an issue where some files exported from NLE's did not play audio.
- Fixed an issue where waveform monitor graticules were not visible with some menus on the screen.

Firmware Update Tutorial:

- Download and unzip the file.
- Copy the file onto a recommended, formatted driver, using the docking station included with your recorder.
- Insert the drive into the Atomos recorder while it’s off.
- Power up the Atomos recorder.
- The screen will show flashing lines of color. This is normal - DO NOT power off!
- Updating will take a few minutes.
- Once completed, the Atomos recorder will power down.
- Power up the Atomos recorder again.
- Check Menu > Product Info > AtomOS Version. This should match the version you have just downloaded.
- Enjoy your updated Atomos recorder !

Firmware Recovery Tutorial:

- Power down the Atomos recorder (Hold power button for 4 seconds).
- Hold down the power button for 10 seconds approximately.
- You will see the “Firmware Update Failed” screen.
- Insert your HDD / SSD.
- The install process will begin and the screen will show flashing lines of color. This is normal - DO NOT power off !
- Once completed, the Atomos recorder will power down.
- Enjoy your updated Atomos recorder !

About Video Recorder Adapters:

Applying a new firmware package on your Video Recorder adapter should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The Video Recorder adapter should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the adapter’s software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates.