- An issue that meant in some rare cases after a lens error occurred the camera could not recover even when it was turned off and then on again has been resolved.
How to verify your camera current firmware version:
- Turn on the camera.
- Press the camera’s MENU button to display the menu.
- Press the multi selector to the left to highlight the menu tab, select the setup tab, and press the OK button.
- Select Firmware version in the setup menu and press the OK button.
- The camera's firmware version will be displayed.
- Turn off the camera.
Quick Install Guide
This is the quick install guide:
- Power the camera from AC adapter unit or use a fully charged battery.
- Create a new folder with an appropriate name on your computer's hard drive.
- Download the firmware file.
- Run the downloaded file to create a folder called L830Update which contains the firmware folder.
- Use a card reader or similar device to copy the firmware folder to the root directory of a memory card formatted in the camera.
- Insert the memory card into the camera's memory card slot and turn on the camera.
- Select Firmware version in the camera's setup menu and follow instructions displayed to upgrade the firmware.
- After the upgrade is complete, turn the camera off and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.
- CATEGORY:
- Digital Camera / Webcam / Camcorder
- COMPATIBLE WITH:
- Windows Vista
Windows Vista 64 bit
Windows 7
Windows 7 64 bit
Windows 8.1
Windows 8.1 64 bit - file size:
- 8.3 MB
- filename:
- F-L830-V11W.exe