Fujifilm X-S20 Camera Firmware 2.01

The following camera linkage features enhanced with FUJIFILM XApp, Ver.2.0.0 to Ver.2.1.0, are now supported:

Note: The following functions 1) and 2) are supported with FUJIFILM XApp Ver 2.0.0 or later and 3) to 5) are with Ver.2.1.0 or later.

1) The following camera data, such as registration and operation information, are now displayed in the “Equipment” tab with FUJIFILM XApp. [Camera data to be displayed in the “Equipment” tab in the “FUJIFILM XApp”］
- Number of lifetime shots
- MECHANICAL SHUTTER
- BATTERY AGE
- Number of days since the last sensor cleaning
- etc.

2) Camera firmware upgrade process becomes easier.
- The “FUJIFILM XApp” automatically downloads and transfer the revised firmware to the memory card in the camera in the background, so that you can upgrade the firmware anytime.
- Note-1: Background data transfer is performed while the camera and “FUJIFILM XApp” are connected via Wi-Fi.
- Note-2: Once the revised firmware is automatically downloaded, the firmware update information is displayed on the LCD, prompting the operator to update to the latest firmware.
- Note-3: It will work at next firmware update although the firmware is modified with this version.

3) RAW image transfer to “FUJIFILM XApp” is now supported

4) Once FUJIFILM XApp connects to the camera, you can shoot and control the camera with smartphone even if the camera is turned off by “AUTO POWER OFF” mode setting.

5)You can browse and transfer images to the camera with FUJIFILM XApp even while the camera is turned off.
- Note: Be sure to update “FUJIFILM XApp” to the latest version (Ver.2.1.0 or later) in order to use these new features above.

AF performance is improved as follows:

1) In Focus Mode AF-C, AF tracking performance has been improved in scenes where the camera tends to lose focus.
2) A firmware bug is fixed that the AF focusing accuracy and distance indicator varied when using a wide-angle lens.

The following functions related to movie recording is implemented to improve usability at movie shooting:

- “WIDE/TRACKING” function is added for focusing during movie recording. In case that the focus mode is set to AF-C, the camera automatically tracks the subject while touching the screen and in AF-S, the camera automatically selects the subject to focus on. AF/MF SETTING＞AF MODE＞WIDE/TRACKING

”FIRMWARE UPDATE” function is added to the setup menu:

- Insert a memory card containing the new firmware into the camera and select [USER SETTING] in the [SET UP] menu to update the firmware.
- The current procedure for firmware update can also continue to be used as follows.
- Start the camera while holding down the DISP/BACK button to update the firmware.
- Connect to a smartphone application to update firmware.

Connecting to “Adobe Camera to Cloud” is now available:

- Still images and movies can be uploaded directly to the Frame.io platform via Internet connection. This enables direct data transfer from the camera to the cloud and edit them at the shooting location, which allows you to access to still images and movie being created and accelerating movie production work in real time and remotely and contributes greatly to the efficiency of movie production workflows.

Other Changes:

- Wi-Fi connection performance is improved, so that the usability for the communication functions becomes more comfortable, such as Frame.io.
- A firmware bug is fixed that the exposure of the images taken changes slightly in case that the “INTERVAL TIMER SHOOTING“ is set at the manual mode.
- A firmware bug is fixed that the aperture value fluctuates while zooming at “Burst” mode with fixed aperture value.
- A firmware bug is fixed that the area settings in some regions are not automatically updated when connecting the camera to the “FUJIFILM XApp” to synchronize time.
- Other minor bugs are fixed.

Precautions:

- If firmware updating fails, the camera may no longer operate correctly in some cases.
- Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- Firmware updating requires approximately 90 seconds.
- Once the firmware has been updated, some data of the previous version cannot be restored.

Installations Instructions:

- Put the formatted memory card to a card reader slot of your PC / Mac.
- Download the firmware
- Copy the downloaded file to the card.
- Take the card from the card reader slot after the copy is completed and put it to the camera.
- Use a fully charged battery. If the camera turns off during the firmware update, it won't work well.
- The time for the firmware update varies depending on the capacity of the firmware, but it is approx. 90 sec. Never turn off the camera and operate it during the firmware update.
- Turn the camera on pressing "DISP/BACK" button to show the display in the right. Then, press the "MENU/OK" button
- After confirming the item as [BODY] to update the camera body, press [OK] button.
- Press the [OK] button to go to next step.
- Press the [UP button] to select "OK".
- Press the [OK] button.
- Firmware updating is started.
- It takes approximately 90 seconds for completing the firmware update.
- When this screen appears, the firmware update has been successfully completed.
- Turn the camera off.
- Check the upgraded firmware.
- By following the above procedure "Firmware version checking procedure", you can see the firmware version.
- Format the card. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.