Atomos Ninja V Recorder Firmware 10.82.00

New Features & Improvements:

- Improvements to accuracy of WiFi connection status, including status shown in the WiFi menu tab and the changing status of the WiFi icon in the top info bar.
- The device's MAC address is now displayed in both WiFi and Ethernet tabs.
- The WiFi On/Off status is saved on reboot.
- Users are presented with a dialogue window to confirm if they want to start or stop streaming.
- Tapping the C2C Status Icon allows file upload status to be hidden or shown.
- In Playback mode, a shortcut to the Proxy folder was added to check the upload status of all clips.
- The record tally light on the CONNECT accessory can now be enabled or disabled through the Ninjas menus.

Capture to Cloud – Upload Icon States

- If files have been recovered, Proxy files will not be uploaded and highlighted with a red exclamation mark icon. The recovered files must be manually uploaded to the Cloud.
- The yellow icon indicates that the clip has not yet been uploaded but is in the upload queue.
- The green tick icon indicates that a clip has been successfully uploaded.

Firmware Update Procedure:

- Insert a compatible, formatted SSD into the Docking Station.
- Unzip the downloaded file and copy the ATOMNJV.FW file to the root of the SSD.
- Eject the SSD (according to operating system guidelines).
- Insert the SSD into the Ninja V.
- Power on the Ninja V and the firmware update process will begin automatically.
- If your Ninja V is already powered on, you will be prompted to perform the firmware update when a drive containing new firmware is inserted.
- Once the update is complete, your Ninja V will power itself down.
- To verify if the firmware update was successfully completed, power your Ninja back on, navigate to the main menu, and scroll to the info tab. 

About Video Recorder Adapter Updates:

Applying a new firmware package on your Video Recorder adapter should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The Video Recorder adapter should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the adapter's software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn't pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit's setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don't forget to regularly check with our website so that you don't miss any updates.