Atomos Ninja Ultra Recorder Firmware 11.04.00

OM SYSTEM OM-1 Mark II RAW Support

ProRes RAW Recording Specification via HDMI
- 4K DCI 17:9 (4096 x 2160) at 23.98p, 24p, 25p, 29.97p, 50p, 59.94p
- 4K UHD 16:9 (3840 x 2160) at 23.98p, 24p, 25p, 29.97p, 50p, 59.94p
- 1080p HD (1920 x 1080) at 23.98p, 24p, 25p, 29.97p, 50p, 59.94p
- Note: WB and ISO controls/slider adjustments are available for this camera in Final Cut Pro.

Panasonic LUMIX G9 II RAW Support

ProRes RAW Recording Specification via HDMI
- 5.8K 4:3 Anamorphic (5760 x 4320) at 23.98p, 25p, 29.97p
- 5.7K 17:9 (5728 x 3024) at 23.98p, 25p, 29.97p, 50p, 59.94p
- 4.4K 4:3 Anamorphic (4352 x 3264) at 50p, 59.94p
- 4K DCI 17:9 (4096 x 2160) at 23.98p, 25p, 29.97p, 50p, 59.94p, 100p, 119.88p
- Note: WB and ISO controls/slider adjustments are available for this camera in Final Cut Pro.

Sony a9 III RAW Support

ProRes RAW Recording Specification via HDMI
- 4.7K 16:9 (4672 x 2628) at 23.98p, 25p, 29.97p, 50p, 59.94p
- Note: WB and ISO controls/slider adjustments are available for this camera in Final Cut Pro.

Atomos recommends that your Ninja Ultra is plugged into mains power before commencing the firmware update:

- Insert a compatible, formatted SSD into the Docking Station.
- Unzip the downloaded file and copy the ATOMNJU.FW file to the root directory of the SSD.
- Eject the SSD according to operating system guidelines.
- Insert the SSD into the Ninja Ultra.
- If you have an Atomos Connect accessory, ensure this is connected to your device before powering on, as the module firmware will also need to be updated as part of this FW release.
- Power on the Ninja Ultra and the firmware update process will begin automatically.
- Note: If your Ninja Ultra is already powered on, you will be prompted to perform the firmware update when a drive containing new firmware is inserted.
- Once the update is complete, your Ninja Ultra will power itself down.
- Power your Ninja Ultra back on and the device will automatically start updating the Atomos Connect accessory.
- To verify if the firmware update was successfully completed, navigate to the main menu and scroll to the info tab. 

About Video Recorder Adapter Updates:

Applying a new firmware package on your Video Recorder adapter should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The Video Recorder adapter should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the adapter's software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn't pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit's setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don't forget to regularly check with our website so that you don't miss any updates.