Fixes:
- Fixed status page display issue on IE7/IE8.
- Fixed firmware and restore page, select a wrong FW to upgrade, sometimes GUI will show nothing.
- Fixed the Status's channel display not change when upper AP changes the channel.
- Fixed the Status show the wrong security when AP side use WPA2-PSK with WAP Compatible.(mix mode)
- Fixed when mac filter enabled , WPS will run and WPS led will flash in registrar.
- Fixed In Network > LAN > IP page , and user can key in different subnet ip for gateway.
- Fixed show wrong IP address , when connect rootAP with encryption type in WEP.
- Fixed status page display issue on IE7/IE8.
- Fixed firmware and restore page, select a wrong FW to upgrade, sometimes GUI will show nothing.
- Fixed the Status's channel display not change when upper AP changes the channel.
- Fixed the Status show the wrong security when AP side use WPA2-PSK with WAP Compatible.(mix mode)
- Fixed when mac filter enabled , WPS will run and WPS led will flash in registrar.
- Fixed In Network > LAN > IP page , and user can key in different subnet ip for gateway.
- Fixed show wrong IP address , when connect rootAP with encryption type in WEP.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
- CATEGORY:
- Router / Switch / AP
- COMPATIBLE WITH:
- OS Independent
- file size:
- 2 MB
- filename:
- WRE2205 v2_1.00(AANK.2)C0.zip
Other versions
OS Independent
- Newer! ZyXEL WRE2205 v2 Range Extender Firmware 1.00(AANK.5)C02016-04-21
- Newer! ZyXEL WRE2205 v2 Range Extender Firmware 1.00(AANK.4)C02016-04-20
- Newer! ZyXEL WRE2205 v2 Range Extender Firmware 1.00(AANK.3)C02014-12-28
- ZyXEL WRE2205 v2 Range Extender Firmware 1.00(AANK.2)C02014-07-23
- ZyXEL WRE2205 v2 Range Extender Firmware 1.00(AANK.1)C02013-12-21