Transition Networks SISTM1040-173D-LRT Switch Firmware 1.30

Changes

1. Fixed long rung fail issue.
2. Add SSH and TACACS+
3. Add PTP client
4. Fix LACP load balance issue and stop issue.
5. Fixed MODBUS TCP issue.
6. Change the HTTPS default Cert file to 1024bit.

Upgrade Firmware

  - The Upgrade Firmware page lets you update the switch firmware. Before updating, make sure your TFTP server is ready and the firmware image is on the TFTP server.
- After upgrading firmware successfully, the system MUST be restarted and the new firmware will be applied in next start.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.