TRENDnet TEW-828DRU v1.1R Router Firmware 1.0.7.0

Changes:

- Fixed WiFi display under Network Status page to notify the correct status of the wireless radios.
- Fixed WiFi LED behavior to display the correct status of the wireless radios.

Firmware Upgrade Procedure:

1. Save the downloaded firmware file (.zip) to your PC.
2. Right click on the downloaded file and select Extract All or Extract Here option. Make sure to remember the location where the extracted file will be saved.
3. Log into to the router’s configuration page.
4. Navigate to the Advanced section, click Setup, and click on Firmware.
5. Click Browse (or Choose File) and select the firmware file (.bin) from the extracted files and click the Apply button to start the firmware upgrade process.
6. Wait until the firmware upload has completed and the device reboots.
7. The firmware upgrade is complete.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.