Ruijie Reyee RG-NBS7003 Switch Firmware EW_3.0(1)B11P219

New Features

VCS(Virtual Cluster Switch)
- By stacking two switches and automatically switching to the standby switch when the active switch fails, hot standby ensures uninterrupted data forwarding in the event of a single point of failure

Upgrade Procedure

(1) Power on the device. Connect the PC to the LAN port of the device and set the IP address of the PC to
Obtain an IP address automatically
(2) Open a browser, enter 192.168.110.1 into the address bar of the browser and press Enter.
(3) Navigate to Network Setup to configure the network and enter homepage.
(4) Navigate to System > Upgrade > Local Upgrade. Click Browse, select an upgrade file (e.g.,
EW_3.0(1)B11P219_EW3200GXI_10182113.tar.gz ) and click Upload

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.