Ruijie Reyee RG-EG209GS Router Firmware EG_3.0(1)B11P210

Manufacturer:

Description

DOWNLOAD NOW

New Features
Web
- Web dimension reduction of wireless configuration
 
Load Balancing
- Support detection parameter configuration of load balancing and state visibility, the default load policy is intelligent load balancing
 
Custom application Group
- Support custom application group. The custom application group can be referenced by a flow control policy or application control policy.
 
Quic Protocol
- Support Quic Protocol, application identification is more accurate
 
Flow control for VPN account
- Support flow control for VPN account
 
Flow control for VPN total broadband
- Support flow control for VPN total broadband
 
ResolvedIssues
903087
- The website blocking function cannot block PPPoE dial-up users.
 
900987
When an error occurs, network self-check progress remains at 5%.
 
894604
- The device restarts randomly due to concurrency issues in processing QUIC packets.
 
899916
- After a VLAN tag is configured on the WAN port, the WAN port cannot obtain an IP address from the uplink device and cannot receive DHCP packets.
 
899445
- Based on connection balancing, the load balancing weight of all WAN ports is greater than 256, causing a balancing error.
 
895047
- Policy-based routing does not take effect. Users need to switch the options in the drop-down list box on the page to activate policy-based routing.
 
883566
- Devices can be configured with IP addresses in multiple network segments by default. But an alarm occurs when no downlink device use IP addresses in multiple network segments.
 
883951
- The L2TP password ending with "#" is not resolved, causing failure to connect to the server.

Changed Features

WiFi Password/ Login Password
- Greater than or equal to 8,less than or equal to 65

Upgrade Procedure

(1) Power on the device. Connect the PC to the LAN port of the device and set the IP address of the PC to
Obtain an IP address automatically
(2) Open a browser, enter 192.168.110.1 into the address bar of the browser and press Enter.
(3) Navigate to Network Setup to configure the network and enter homepage.
(4) Navigate to System > Upgrade > Local Upgrade. Click Browse, select an upgrade file and click Upload

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

Reyee RG-EG209GS Router Firmware Ruijie Reyee Router Firmware Reyee Router Firmware RG-EG209GS ReyeeOS Router Ruijie

  CATEGORY:
Router / Switch / AP
  COMPATIBLE WITH:
OS Independent
  file size:
13.8 MB
  filename:
Ruijie RG-EG209GS Series Routers EG_3.0(1)B11P210 Firmware.zip