NETGEAR SRX5308 Firewall Firmware 4.3.3-3

Fixes:

- WAN1 is getting down and come up after two days running traffic in load balancing mode with customer configuration file.
- Unable to make multiple calls from WAN to LAN using SIP.
- Fixed SSL VPN ActiveX certificate expired.

Known Issues and limitations:

- Not able to establish IPv6 SSL-VPN tunnel from java based browsers with java 8 update 20 version.
- Unable to run the FTP traffic from FileZilla client over SSL Port forwading tunnel in the Windows7 64 bit host.
- Unable to establish port forwarding tunnel from Windows7 64 bit IE9 browser.
- Internet Traffic Statistics are not getting updated correctly in auto rollover mode
- NFS service support: Only support NFS v4 "mount" command, do not support NFS v2, v3 and "showmount" command.
- No NAT translation of SIP headers during REGISTER, outbound call and SDP.
- Observed inconstistant behaviour with voice traffic when server is lying in LAN and DMZ side.
- Unable to establish the fourth call from LAN side.
- Unable to establish the IPv6 manual tunnel with traffic selector as ANY/ANY.
- Able to Configure IPv6 Address pools and DMZ adverisements prefixes through CLI when DMZ is not enabled.
- [CLI]Firewalllogs6 table is not updating properly for enabling and disabling logs through CLI.
- Able to run Port triggering inbound traffic with the open port from any WAN hosts.
- Daylight saving functionality is not working for time zone "GMT-0"
- PPPoE over IPv6 WANs are getting restarted and IPv4 WAN is not responding after changing WAN mode for multiple times.
- Able to establish VPN gw-gw tunnel with mismatch user-FQDN and able to run traffic.
- Traffic is not following WAN upload or down load(higher one of them )speeds if the upload and down load speeds having large difference.
- Unable to establish L2TP connection from WAN secondary addresses fail.
- [IPv6]Unable to run the FTP ,http,iperf traffic on pppoe over IPv6 with DHCP option as "Disable-DHCPv6"
- Able to select same WAN for both primary and secondary WANs for auto rollover WAN mode in IPv4/IPv6 dual stack mode.
- Unable to get the IP to LAN host after rebooting the device continuously for over night.
- [IPv6]Displaying the message as address not found instead of 'Blocked from this Browser' for IPv6 policy 'Deny Login From Defined Browsers.'