NETGEAR FS726TP Switch Firmware 2.0.1.09

New Feature / Modification:

1. Add a reconfigured host entry in the SNMP Host Table to allow SNMP manager with any IP address to retrieve MIB information using "public" as community string.

Fixes:

1. Fix the problem that switch freezes with Firefox or Chrome Brower when creating a new 802.1Q VLAN ID.
2. Fix the problem that when IGMP packet is forwarded out from one of static LAG ports, it gets forwarded back from another static LAG port.
3. Fix the problem that ifDescr of ifTable does not show the port number.
4. Fix the problem that ifPhysAddress of ifTable does not display port's MAC address.

Known Limitation

1. Upgrade can only be performed via the port that is a member of VLAN 1.
2. Cannot restore backup configuration by Firefox or Google Chrome.
Upgrading procedure

Warning:

Improper upgrade procedure may cause the device to become inoperable and it will need to be replaced.
1. Upgrade boot code "FS726TP_BootCode_SCC.hex" by SmartWizard.
2. Once upgrade complete, power cycle switch. At this moment, system will boot up at boot code mode automatically
3. Now the unit should be able to discover by SmartControlCeneter and will not be discovered by SmartWizard anymore.
4. Upgrade " FS726TP_V2.0.1_02.bin" by SmartContolCenter

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.