Linksys SRW224G4 Switch Firmware 1.2.3.0

This package provides the necessary installation files of Linksys SRW224G4 Switch Firmware version 1.2.3.0 .

Installation steps:

1. Access the router’s web-based setup page.
IMPORTANT: Make sure to enter the correct router IP address in accessing the router’s web-based setup page. The default router IP address is 192.168.1.1. If this address does not work, it might have been changed when the router was set up so you need to check the new IP address.
2. Click on Administration > Firmware Upgrade.
3. Click on the Browse… button.
4. Locate and select the file that you have downloaded then click Open.
NOTE: If you are using Mac OS X, click the Choose button.
5. Click the Start Upgrade button. A warning prompt stating not to interrupt the upgrade will appear. However, if you selected the incorrect file a prompt similar to the image below will appear. If this happens, click the OK button and repeat Steps 2 to 4 and select the correct file.
6. Click Continue when it prompts you that the upgrade has been successful.
7. Powercycle the router by unplugging it from the power outlet for 10 seconds, then re-plug it.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.