ASUS DSL-N66U Router Firmware 1.0.7.6

Fixes:

- DSL driver updated - v5.4.11.25_20140430.
- Upgrade OpenSSL library from 1.0.0d to 1.0.0m.
- Now supports VDSL WAN (PTM) multi service for IPTV.
- Now supports live notification service.
- WiFi iNIC host driver updated: v2.7.0.5. In order to address Guest Network related issues.
- Modify modulation from "Auto Sync-Up" to "G.DMT" if sync up with G.992.1 G.DMT.
- Modify ADSL Annex Mode to Annex B if sync-up with Annex B.
- Fixed the garbled output from 'ping' function on Network Analysis tab.
- Fixed Samba set to account mode but warning message still shown in notification issue.
- Fine tune the DSL Feedback feature.
- Fixed disk file size cannot exceed 2GB issue.
- AiCloud updated to v2.0.0.5.
- Fixed various UI related issues.
- Fixed if no internet access, Routing Table and Port Forwarding (System Log) display would be pending for 30s issue.
- Add an option to control remove VLAN tag from WAN for IPTV interface.
- Remove VLAN tag from WAN if enable 802.1Q.
- Fixed sometimes NAT loopback rule not added to iptables issue.
- Remove the UI default netmask value for PPPoA/Static IP.

ADSL WAN (ATM) QIS manual setting list updated:

- Add United Kingdom ISP, Plusnet (PPPoA).
- Add United Kingdom ISP, Plusnet (PPPoE).
- Add United Kingdom ISP, IDnet - Home Lite.
- Add United Kingdom ISP, The Co-operative phone and broadband.
- Add United Kingdom ISP, The Post Office - Homephone and Broadband Premium.
- Add United Kingdom ISP, Demon Internet.
- Add United Kingdom ISP, Timico.
- Add Italy ISP, Telecom Italia (PPPoA).
- Add Czech Republic, T-Mobile.
- Add Slovakia ISP, Orange.
- Add New Zealand ISP, Vodafone.
- Add France ISP, French Data Network / Nerim.
- Add Germany ISP, Deutsche Telekom - T-DSL.
- Add Scotland ISP, BT Broadband.
- Add Germany ISP, Deutsche Telekom - IP Phone Call & Surf.
- Add Austria ISP, A1.
- Add Germany ISP, Versatel.
- Add Greece ISP, Otenet (VC-Mux).
- Add Australia ISP, Exetel.
- Add Belarus ISP, Beltelecom.
- Add South Africa ISP, Afrihost.
- Add Germany ISP, T-Online - Call and Surf.
- Add Australia ISP, Belong.
- Add Italy ISP, Latina Telefonia.
- Add Scotland ISP, British Telecom - Option 3.
- Add Germany ISP, Mnet.

VDSL WAN (PTM) QIS manual setting list updated:

- Add Czech Republic ISP, T-Mobile.
- Add New Zealand ISP, Bigpipe - Turbo.
- Add Russia ISP, Ростелеком - Интернет + IPTV.
- Add Germany ISP, Telekom - Call & Surf Comfort Speed.
- Add Czech Republic ISP, Telefónica Czech Republic, a.s.
- Add New Zealand ISP, Vodafone - VDSL.
- Add The Netherlands ISP, AX4ALL - Internet Extra 50/5.
- Add Norway ISP, Nextgentel - Bredband.
- Add Guernsey Channel Islands ISP, Sure - Superfast 40MB.

Notice: After upgraded with 1.0.7.6 please press the hardware reset button of DSL-N66U over 8 seconds to reset the DSL modem router.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.