ASUS DSL-AC56U Router Firmware 1.1.0.4

Changes:

- DSL driver updated - v5.5.1.135.
- Enable G.vector (G.993.5) by default(Administration > DSL Setting).
- Enable G.INP (G.998.4) by default(Administration > DSL Setting).
- Fixed VDSL2 connection issue(G.vector enabled) with certain DSLAM in Germany.
- Fixed possible ADSL/ADSL2/2+ SNRM will be constant in certain condition issue, which leads to interruption.
- Fixed ADSL2/2+ stability issue with some ISP.
- Fixed G.dmt Bitswap abnormal issue with some ISP.
- Fixed ADSL2/2+ Bitswap might gets triggered incorrectly/ frequently issue.
- Fixed possible synced with lower upstream data rate issue with certain DSLAM.
- Now when VDSL Annex type is Region B(Europe) but US0 type is Annex A, DSL Log would display as Annex A instead of Annex B(for this case, Annex Mode should be configured as Annex A/I/J/L/M or Annex A).
- Display G.inp Upstream/ Downstream info(System Log > DSL Log).
- Fixed possible Bitswap bug caused SNRM to drop gradually and leads to interruption.
- IGMP Snooping enabled by default, fix AirPlay/ AirPrint related issues(Wireless > Professional).
- Fixed WiFi related issues.
- Fixed possible IE compatibility issues.
- Fine tune Feedback feature.
- Fixed Network Place(Samba) Share/ FTP Share related issues.
- Fixed Media Server upgrade issue(USB Application > Media Server).
- Fixed Printer Server related issues.
- Media Server updated: v1.0.0.47.
- Fixed Media Server upgrade issue.
- Fixed Traffic Monitor > Daily/ Last 24 Hours traffic calculation incorrect issue.
- Fixed WAN > NAT Passthrough related issues.
- Fixed 5G AP list cannot be displayed correctly in WDS page issue.
- QIS(Quick Internet Setup) auto detection list updated.
- QIS(Quick Internet Setup) now supports IPTV setting, specifically for UK/ Turkey/ Russia ISP.
- Fixed UI related issues.
- Adopt DDNS retry mechanism.
- Add support for 4 Huawei USB dongles(E3131/ E3372/ E303u/ E3531s).
- Now QIS(Quick Internet Setup) supports ADSL WAN (ATM) VLAN ID setup, specifically for Germany/ Thailand ISP.
- Fixed wscd processes affect system stability issue(with Windows network discovery enabled).
- Fixed when set Secondary WAN as DSL WAN (PTM) or Ethernet WAN, some WAN settings would not be correct after reboot.
- Remove Rx AGC Gain Adjustment(ADSL/ VDSL) DLA auto configuration.
- Fixed PPPoE/ PPPoA compatibility/ Connect On-Demand issues.
- Fine tune System Log, such as reduce WiFi driver debug messages.
- Fixed Dualwan Loadbalance routing rule cannot be added issue.
- Fixed L2TP/ PPTP VPN client related issues.
- Fixed Guest Network related issue.

ADSL WAN (ATM) QIS manual setting list updated, and includes more settings:

- Argentina
- Armenia
- Australia
- Azerbaijan
- Belgium
- Brazil
- Brunei Darussal
- Cambodia
- Canada
- Colombia
- Dominican Republic
- Colombia
- Egypt
- France
- Germany
- Greece
- Hungary
- Iceland
- India
- Indonesia
- Iran
- Ireland
- Italy
- Kazakhstan
- Luxembourg
- Malaysia
- Mexico
- Netherlands
- New Zealand
- Norway
- Palestinian Authority
- Peru
- Poland
- Portugal
- Saudi Arabia
- Singapore
- Spain
- Sweden
- Thailand
- Tunisia
- United Kingdom
- Ukraine
- USA
- Venezuela
- Vietnam

VDSL WAN (PTM) QIS manual setting list updated, and includes more settings:

- Argentina
- Brazil
- Canada
- Finland
- France
- Germany
- Poland
- Qatar
- Spain
- United Kingdom
- Vietnam

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.