Canon PIXMA Endurance G2000 Printer Firmware Updater 1.0/3.030 for Mac OS

This updater will upgrade your printer's firmware to version 3.030. To perform this upgrade, a USB cable and a computer are needed. If your printer's firmware version is already 3.030 or later, the update is not necessary. To check your printer's firmware version, refer to the Update Procedure included in the downloaded file.

Double-click the downloaded exe. file to decompress it. Then, open the newly-created "fuu_-win-g3000-1_0-ea7" folder. And open the language’s folder inside "HowTo" folder, then execute the update of the firmware based on the manual "fut_upgrade.html".

About Printer Firmware Package:

Before you even consider installing this firmware, go to the system information page of the device and make sure that the version currently installed on it isn’t newer or matching this one.

If you upgrade to this build, imaging devices can get printing and scanning quality improvements, new options added to the setup menu, feature enhancements, various fixes, as well as several other changes that can boost stability.

Considering the large number of devices and manufacturers, as well as the wide variety of methods for upgrading imaging units, we recommend that you read the installation steps and initiate a firmware update process only when you have familiarized yourself with the procedure.

In addition to that, it would be best if you perform this task in a steady power environment such as the one ensured by a UPS unit. Also, make sure you don’t power off the imaging device or use its buttons during the installation, in order to avoid any malfunctions.

Therefore, if you intend to apply this version, click the download button, and install the package. Remember to check with our website as often as possible so that you don’t miss a single new release.