EnGenius EOC5611P Access Point Firmware 1.3.1

802.11a/g Outdoor High Power 500mW Bridge / Access Point with Dual Antenna Polarity & Dual Antennas

ANTENNA SPECIFICATIONS:
Internal: Directional Panel Antenna; Peak Gain 14dBi
Frequency Band: 5.1-5.8GHz
Horizontal -3dB Bandwidth: 35°
Vertical -3dB Bandwidth: 15°
Antenna Polarity: Dual-Polarized; Vertical/Horizontal
Polarity Selection: Software Controlled
External: RP-SMA Female Type x2 (2.4GHz)*
*The external antenna is not included in the package. User needs to decide the antenna gain before making purchase.

HARDWARE SPECIFICATIONS:
MCU/RF: Atheros AR2313 + AR5112
Memory: 32MB SDRAM
Flash: 8MB
Physical Interface:
One 10/100 Fast Ethernet RJ-45
Reset Button
Antenna Switch (Internal & External)
RP-SMA Connector x2 (2.4GHz & 5GHz)
LED Indicators:
Power (Status)
LAN (10/100Mbps)
WLAN (Wireless Activity)
Link Quality x3 (Client Bridge mode)
Green: Excellent Quality / Yellow: Good Quality / Red: Poor Quality
Power Requirements:
Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design
Power Adapter: 24V/1A DC
Regulation Certifications: FCC Part 15C/15B/15E, EN301 893, EN 300 328, EN 301 489-1/-17, EN60950, IC
* RSSI indication is only in client bridge mode.

RF SPECIFICATIONS:
Frequency Band:
802.11a: 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz
802.11b/g: 2.412~2.472GHz
Modulation Technology: OFDM : BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK
Operation Channels:
802.11a: 21 for North America
802.11b/g: 11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity (Typical):
IEEE 802.11a
-92dBm @ 6Mbps
-73dBm @ 54Mbps
IEEE 802.11g
-92dBm @ 6Mbps
-75dBm @ 54Mbp
IEEE 802.11b
-97dBm @ 1Mbps
-91dBm @ 11Mbps
Available Transmit Power (Average):
IEEE 802.11a
26dBm @ 6~24Mbps
24dBm @ 36Mbps
22dBm @ 48Mbps
20dBm @ 54Mbps
IEEE 802.11g
26dBm @ 6~24Mbps
24dBm @ 36Mbps
23dBm @ 48Mbps
22dBm @ 54Mbps
IEEE 802.11b
27dBm @ 1~11Mbps

SOFTWARE FEATURES:
Topology: Infrastructure
Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11a (5GHz WLAN) / 802.11b/g (2.4GHz WLAN)
Operation Mode: Access Point / Client Bridge / Client Router / WDS
LAN: DHCP Server / DHCP Client
VPN: VPN pass-through
Wireless:
Channel Selection (Setting varies by countries)
Transmission Rate: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Long Distance Transmission: 1km to 30km (ACK Timeout)
Auto Channel Selection
Traffic Shaping
Transmit Power Table
AP Detection
Narrow Bandwidth 5/10/20MHz Support
Signal Strength LED Indicators (3 colors)
PPPoE & PPtP (Client Router mode)
Preferred SSID
Mutiple SSID Support (up to 4)(Access Point mode)
802.1q VLAN Tagging Support
Security:
WEP Encryption 64/128/152bits
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Layer 2 Isolation
Hide SSID in Beacons
MAC Address Filtering (up to 50)
Wireless STA (Client) Connected List
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP)
Firmware Upgrade: Upgrade Firmware via Web Browser / Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Event Log
SNMP: v1, v2c
MIB: MIB I, MIB II (RFC1213)
Backup & Restore: Settings Through Web
Time Setting: NTP (Auto Setting) / Manual Change

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation -20°C to 70°C (-4°F to 158°F) / Storage -30°C to 80°C (-22°F to 176°F)
Humidity (Non-condensing): 0% ~ 95% Typical
Dimensions: L: 10.24” (260mm) x W: 3.31” (84mm) x H: 2.17” (55mm)
Weight: 0.66lb. (300g)