Gigabyte GA-F2A85X-D3H (rev. 1.0) AMD AHCI Preinstall Driver 1.3.001.0043 for Windows 8

Specifications:

- APU
FM2 Socket:
AMD A series processors
AMD Athlon series processors
Chipset
AMD A85X

- Memory
4 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory
The maximum 64 GB of system memory can be supported using 16 GB (or above) memory modules. GIGABYTE will update the memory support list on the official website when the memory modules are available on the market.
Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
Dual channel memory architecture
Support for DDR3 1866/1600/1333/1066 MHz memory modules
Support for AMD Memory Profile (AMP)/ Extreme Memory Profile (XMP) memory modules

- Onboard Graphics
APU:
To use the onboard graphics ports, you must install an AMD APU with integrated graphics.
1 x D-Sub port
1 x DVI-D port, supporting a maximum resolution of 2560x1600
Support for 2560x1600 resolution requires both a monitor and cable that support Dual Link DVI.
The DVI-D port does not support D-Sub connection by adapter.
1 x HDMI port, supporting a maximum resolution of 1920x1200

- Audio
Realtek ALC892 codec?
High Definition Audio?
2/4/5.1/7.1-channel
Support for S/PDIF Out

- LAN
1 x Realtek GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
1 x PCI Express x16 slot, running at x16 (PCIEX16)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
3 x PCI Express x1 slots
(All PCI Express slots conform to PCI Express 2.0 standard.) ?
2 x PCI slots

- Multi-Graphics Technology
Support for AMD Dual Graphics technology
Only A series APUs support AMD Dual Graphics.

- Storage Interface
Chipset:
8 x SATA 6Gb/s connectors supporting up to 8 SATA 6Gb/s devices
Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD

- USB
Chipset:
Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

- Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
8 x SATA 6Gb/s connectors
1 x APU fan header
3 x system fan headers
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB 3.0/2.0 header
2 x USB 2.0/1.1 headers
1 x serial port header
1 x Clear CMOS jumper
1 x Trusted Platform Module (TPM) header

- Back Panel Connectors
1 x PS/2 keyboard/mouse port
1 x D-Sub port
1 x DVI-D port
1 x HDMI port
2 x USB 3.0/2.0 ports
4 x USB 2.0/1.1 ports
1 x RJ-45 port
1 x optical S/PDIF Out connector
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone)

- I/O Controller
iTE I/O Controller Chip

- H/W Monitoring
System voltage detection
APU/System temperature detection
APU/System fan speed detection
APU overheating warning
APU/System fan fail warning
APU/System fan speed control
Whether the APU/system fan speed control function is supported will depend on the APU/system cooler you install.

- BIOS
2 x 64 Mbit flash
Use of licensed AMI EFI BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

- Form Factor
ATX Form Factor; 30.5cm x 22.5cm