Intel SSD Pro Administrator Tool 1.1.3

The Intel Solid-State Drive Pro Administrator Tool is a Windows command-line tool designed to support security and manageability settings on the Intel SSD Professional Family products.

Changes:

- Adds support for the Intel SSD Pro 5400s, E 5400s and E 5410s Series products.

This tool supports the following functions:

- Detects and reports status of Intel SSDs attached to the system
- Enables eDrive (supported on the Intel SSD Pro 2500 Series)
- Completes the PSID Revert process
- Executes a Secure Erase

Note:

- The downloaded file is a self-contained executable that needs to be run from a command prompt with administrator privileges.

This download is valid for the products listed below:

- Intel SSD Pro 1500 Series (80GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 1500 Series (120GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 1500 Series (120GB, M.2 42mm SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 1500 Series (180GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 1500 Series (180GB, M.2 80mm SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 1500 Series (240GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 1500 Series (240GB, M.2 80mm SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 1500 Series (360GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 1500 Series (360GB, M.2 80mm SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 1500 Series (480GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 2500 Series (120GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 2500 Series (180GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 2500 Series (180GB, M.2 80mm SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 2500 Series (240GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 2500 Series (240GB, M.2 80mm SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 2500 Series (360GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 2500 Series (360GB, M.2 80mm SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 2500 Series (480GB, 2.5in SATA 6Gb/s, 20nm, MLC)
- Intel SSD Pro 2500 Series (360GB, M.2 80mm SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 2500 Series (240GB, M.2 80mm SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 2500 Series (180GB, M.2 80mm SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 2500 Series (120GB, 2.5in SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 2500 Series (180GB, 2.5in SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 2500 Series (360GB, 2.5in SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 2500 Series (240GB, 2.5in SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 2500 Series (480GB, 2.5in SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 2500 Series (128GB, 2.5in SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 2500 Series (256GB, 2.5in SATA 6Gb/s, 16nm, MLC)
- Intel SSD Pro 5400s Series (120GB, M.2 80mm SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (120GB, 2.5in SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (480GB, 2.5in SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (240GB, 2.5in SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (360GB, 2.5in SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (180GB, M.2 80mm SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (180GB, 2.5in SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (240GB, M.2 80mm SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (360GB, M.2 80mm SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (1.0TB, 2.5in SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (1.0TB, M.2 80mm SATA 6Gb/s, 16nm, TLC)
- Intel SSD Pro 5400s Series (480GB, M.2 80mm SATA 6Gb/s, 16nm, TLC)

About SSD Toolbox:

The Solid State Drive (SSD) Toolbox is an update utility that properly recognizes the SSD unit(s) installed on your system. It also displays various pieces of information regarding the connected storage devices and searches for a new suitable firmware version.

However, before you consider downloading this version, carefully read the release notes for changes that can apply to your SSD. Once you have updated your drive, reboot to make sure that all modifications take effect.

When it comes to installing this software, the steps are very easy because all you have to do is get the downloadable package (extract it if necessary) and run the available setup. Once the installation is complete, run the Toolbox and follow the instructions for updating the SSD.

That being said, make sure this Toolbox version has a new firmware version available for your solid state drive and, if so, hit the download button, and install the software. Otherwise, check with our website as often as possible so that you don’t miss the release that can improve your SSD.