Intel SSD Firmware Update Tool 4.1.248

Changes for this release are as follows:

- Firmware Update to G004一0553 for lntel Optane Memory H20
- Firmware Update to E2010650 for lntel Optane SSD P4800X and P4801X Series
- Firmware Update to E2010650 for lntel Optane SSD 905P and 900P Series

This download is valid for the products listed below:

- Intel Optane SSD 900P Series (280GB, 2.5in PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 900P Series (280GB, 1 2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 900P Series (480GB, 1 2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 800P Series (58GB, M.2 80mm PCIe 3.0, 3D Xpoint)
- Intel Optane SSD 800P Series (118GB, M.2 80mm PCIe 3.0, 3D Xpoint)
- Intel Optane Memory M10 Series (16GB, M.2 80mm PCIe 3.0, 20nm, 3D XPoint)
- Intel Optane SSD 905P Series (1.5TB, 1 2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 905P Series (480GB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD 905P Series (1.5TB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD 905P Series (960GB, 1 2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 905P Series (960GB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane Memory H20 with Solid State Storage (32 GB + 512 GB, M.2 80mm PCIe 3.0, 3D XPoint, QLC)
- Intel Optane SSD 905P Series (380GB, M.2 110mm PCIe x4, 20nm, 3D XPoint)
- Intel Optane Memory Series (16GB, M.2 80mm PCIe 3.0, 20nm, 3D Xpoint)
- Intel Optane Memory Series (32GB, M.2 80mm PCIe 3.0, 20nm, 3D Xpoint)
- Intel Optane Memory H10 with Solid State Storage (Intel Optane Memory 32GB + Intel QLC 3D NAND SSD 1TB, M.2 80mm PCIe 3.0)
- Intel Optane Memory H10 with Solid State Storage (Intel Optane Memory 16GB + Intel QLC 3D NAND SSD 256GB, M.2 80mm PCIe 3.0)
- Intel Optane Memory H10 with Solid State Storage (Intel Optane Memory 32GB + Intel QLC 3D NAND SSD 512GB, M.2 80mm PCIe 3.0)
- Intel Optane SSD DC P4800X Series (1.5TB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD DC P4800X Series (1.5TB, 1 2 Height PCIe x4, 3D XPoint)
- Intel Optane SSD DC P4800X Series (375GB, 1 2 Height PCIe x4, 3D XPoint)
- Intel Optane SSD DC P4800X Series (750GB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD DC P4800X Series (750GB, 1 2 Height PCIe x4, 3D XPoint)
- Intel Optane SSD DC P4800X Series (375GB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD P1600X Series (118GB, M.2 80mm PCIe 3.0 x4, 3D XPoint)
- Intel Optane SSD DC P5800X Series (800GB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane Memory H20 with Solid State Storage (32 GB + 1 TB, M.2 80mm PCIe 3.0, 3D XPoint, QLC)
- Intel Optane SSD DC P5800X Series (1.6TB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD P1600X Series (58GB, M.2 80mm PCIe 3.0 x4, 3D XPoint)

About SSD Toolbox:

The Solid State Drive (SSD) Toolbox is an update utility that properly recognizes the SSD unit(s) installed on your system. It also displays various pieces of information regarding the connected storage devices and searches for a new suitable firmware version.

However, before you consider downloading this version, carefully read the release notes for changes that can apply to your SSD. Once you have updated your drive, reboot to make sure that all modifications take effect.

When it comes to installing this software, the steps are very easy because all you have to do is get the downloadable package (extract it if necessary) and run the available setup. Once the installation is complete, run the Toolbox and follow the instructions for updating the SSD.

That being said, make sure this Toolbox version has a new firmware version available for your solid state drive and, if so, hit the download button, and install the software. Otherwise, check with our website as often as possible so that you don't miss the release that can improve your SSD.