Intel SSD Client NVMe Preinstall Driver 4.4.0.1003

This Windows driver can be used to enable your system to recognize the Intel SSD 665p Series, Intel SSD 660p Series, Intel Optane SSD 900P Series, Intel Optane SSD 905P Series, Intel SSD 750 Series, and Intel SSD Pro 7600p/760p/E 6100p Series.

New for this release:

- Added support for Intel SSD 665p Series
- Resolved possible BSOD when issuing a temperature request
- Windows PowerShell interface returns correct information for Serial Number

This download is valid for the products listed below:

- Intel Optane SSD 900P Series (280GB, 1/2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 900P Series (280GB, 2.5in PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 900P Series (480GB, 1/2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 905P Series (480GB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD 905P Series (960GB, 1/2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 905P Series (960GB, 2.5in PCIe x4, 3D XPoint)
- Intel SSD 660p Series (1.0TB, M.2 80mm PCIe 3.0 x4, 3D2, QLC)
- Intel SSD 660p Series (2.0TB, M.2 80mm PCIe 3.0 x4, 3D2, QLC)
- Intel SSD 660p Series (512GB, M.2 80mm PCIe 3.0 x4, 3D2, QLC)
- Intel SSD 750 Series (1.2TB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD 750 Series (1.2TB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD 750 Series (400GB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD 750 Series (400GB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD 750 Series (800GB, 1/2 Height PCIe 3.0 x4, 20nm, MLC)
- Intel SSD 750 Series (800GB, 2.5in PCIe 3.0 x4, 20nm, MLC)
- Intel SSD 760p Series (1.024TB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)
- Intel SSD 760p Series (128GB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)
- Intel SSD 760p Series (2.048TB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)
- Intel SSD 760p Series (256GB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)
- Intel SSD 760p Series (512GB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)
- Intel SSD E 6100p Series (128GB, M.2 80mm PCIe 3.0 x4, 3D2, TLC)
- Intel SSD E 6100p Series (256GB, M.2 80mm PCIe 3.0 x4, 3D2, TLC)
- Intel SSD Pro 7600p Series (1.024TB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)
- Intel SSD Pro 7600p Series (128GB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)
- Intel SSD Pro 7600p Series (2.048TB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)
- Intel SSD Pro 7600p Series (256GB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)
- Intel SSD Pro 7600p Series (512GB, M.2 80mm, PCIe 3.0 x4, 3D2, TLC)

About SSD Toolbox:

The Solid State Drive (SSD) Toolbox is an update utility that properly recognizes the SSD unit(s) installed on your system. It also displays various pieces of information regarding the connected storage devices and searches for a new suitable firmware version.

However, before you consider downloading this version, carefully read the release notes for changes that can apply to your SSD. Once you have updated your drive, reboot to make sure that all modifications take effect.

When it comes to installing this software, the steps are very easy because all you have to do is get the downloadable package (extract it if necessary) and run the available setup. Once the installation is complete, run the Toolbox and follow the instructions for updating the SSD.

That being said, make sure this Toolbox version has a new firmware version available for your solid state drive and, if so, hit the download button, and install the software. Otherwise, check with our website as often as possible so that you don't miss the release that can improve your SSD.