Buffalo TS4800D NAS Firmware 2.71

Fixes:
- Modified a message which will be displayed when "Other Amazon S3 API compatible service" is selected.

Description:

- This software will update 5000 and 4000 series TeraStations' firmware to version 2.71.
- If your unit's firmware is already version 2.71 or later, you don't need this update.

How to confirm firmware version:

- Select your TeraStation in NAS Navigator2.
- The firmware version is displayed in the bottom right hand corner of the window.

Before updating the firmware:

- Do not turn off the TeraStation until the firmware update is complete and the "finished" message is displayed.
- USB drives may not be mounted automatically after updating the firmware. To mount them, unplug and then reconnect them.
- Disconnect iSCSI volumes with the iSCSI initiator before updating the firmware.

Notes:

- Make sure the TeraStation's Ethernet frame size is set to a value smaller than that of the hub or router. Larger frame sizes may not transfer data to the TeraStation correctly.
- Updating version 2.40 or earlier firmware to 2.71 will overwrite your current guest account settings. The guest account will be enabled and all user accounts' email addresses will be blank. Reconfigure the guest and user account settings after this update.

How to update your firmware:

- Connect the TeraStation and a computer to run the updater on the same network subnet.
- The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
- Exit all applications. Also, stop or exit any firewall software.
- Extract the downloaded file and run "TSUpdater.exe". When a TeraStation is detected, an update window will open.
- If multiple TeraStations are connected to the network, select which TeraStation to update.
- Click 'Update' and enter the TeraStation's administrator password.
- Click 'OK'.
- It will take several minutes for the firmware to update. During the update process, the info LED will blink. Don't disconnect or power down the TeraStation until the update is complete.
- When the update is complete, a message will be displayed.