devolo MicroLink dLAN Audio Adapter Firmware 1.1.0.16

Proceed as follows to update your MicroLink dLAN Audio firmware:

- Copy the firmware file onto the hard disk of the computer that is to be used to update the MicroLink dLAN Audio firmware.
- On this computer, open the configuration page of the MicroLink dLAN Audio by selecting "MicroLink Informer" -> "Device" -> "Control device". 
- The MicroLink dLAN Audio configuration page will be displayed; change to the “Firmware” area. Now click on the button “Browse” and mark the firmware file “ML-DLAN-AUDIO-1-1-0-16.bin” and confirm with “Open”.
- You can then start the firmware upgrade with the button “Upload firmware”.
Please do not repeatedly press the “Upload” button; the upgrade takes about 1 minute. The MicroLink dLAN Audio restarts automatically after a successful 
upgrade.

!!Important notice!!

While the firmware upgrade is in process, please ensure that you do not interrupt the connection between the PC and the MicroLink dLAN Audio, do not switch the PC off, and do not unplug the MicroLink dLAN Audio from the power socket. While the firmware upgrade is in process, the four channel LEDs on the left side of the MicroLink dLAN Audio illuminate, as do the “Power” and “Link” LEDs on the right-hand side. The “Act” LED blinks rapidly.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.