Yamaha Dante MY16-AUD Interface Firmware 3.7.2.2

This package provides the necessary installation files of Yamaha Dante MY16-U Interface Firmware version 3.7.2.2.

Fixes:

- Fixed a problem in which Yamaha mixing console DM2000 would report a message on its display as "Total Power Capability Exceeded", referring to its card slots. It occurred when using five cards of Dante-MY16-AUD with the previous firmware v3.7.1.11. In this case, any console operations were not permitted. This problem was caused by the incorrect judgment of the electric current notified by the previous firmware.

Important notice:

- In order to install this firmware v3.7.2.2, your Dante-MY16-AUD's firmware version must be　v3.4.0. If your firmware version is earlier than v3.4.0, please update it tov3.4.0 first, and then to v3.7.2.2.
- When updating your firmware to v3.7.2.2, please make sure to check "Override Device Matching" in Dante Firmware Update Manager. Otherwise, you cannot find the matching device.
- Please use the appropriate version of Dante Firmware Update Manager.
- If your firmware version is v3.3.6 or earlier, use Dante Firmware Update Manager v1.0.6
- If your firmware version is v3.3.9 or later, use Dante Firmware Update Manager V1.4.16.6 for Win, Dante Firmware Update Manager V1.4.16.6 for Mac.

Installation steps:

1. Open the Dante Firmware Update Manager.
2. If you see the interface selection screen, select the primary Dante network.
3. Select Update Dante Firmware.
4. Click Browse.
5. Browse to the directory in which you saved your firmware update files.
6. Select the required Dante firmware update file.
7. View the discovered Dante devices, and select those you wish to update, by clicking the associated checkboxes.
8. Select Start. The Firmware Update Manager will start updating all selected devices.
9. Power cycle the Dante-enabled devices that have been upgraded, to finish applying the firmware update and restore your configuration. If the device is not power cycled or rebooted, the update will not be applied.

About Firmware Update:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.