Pioneer DJM-350 DJ Controller Firmware 5.06

This package provides the necessary installation files of Pioneer DJM-350 DJ Controller Firmware version 5.06.

Fixes:

- Bug fixed: SHORT ECHO is not cleared when you turn off the "SHORT ECHO" button while moving the "LEVEL/DEPTH" knob.

Installation steps:

1. Download the firmware file.
2. Copy the firmware file to a USB-Memory.
3. Turn off the power of the unit and connect the USB-Memory to the unit.
4. Turn on the "Update Mode" by pressing both "FADER START" buttons.
5. Wait until the update process is complete and reboot the device.
6. Check the version is updated.

Important note:

- Do not turn the power off during the update.

About DJ Controller Firmware:

Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.

However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).

This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device.