NETGEAR FSM7352S Switch Firmware 7.2.1.6

Fixes:
- If configuration steps contain command lines to set the same PVID for a port multiple times, the configuration file may not be saved when the save command is issued.
- On FSM7328S or FSM7352S where OSPF protocol is not supported but the configuration may show OSPF is enabled and can not be disabled from the CLI or GUI.
- Traffic destine to a VRRP virtual MAC address will stop being forwarded after the VRRP master is rebooted. No response on console and from GUI while modify MSTP port path cost thru GUI
- The switch would fail in using xmodem protocol to download file to the switch by serial port
- GUI MSTP: VLAN 24 can not be associated with MST instance.
- FSM73xxPS: POE load power consumption shows zero although POE is proving power
- OSPF GUI configuration page is missing “external-lsdb-limit” field
- HTTP firmware download failed while using GUI with HTTPS mode
- FSM7328S: DHCP server configuration web GUI page shows bad client id in manual mode
- FSM73xxS: Sometime firmware upgrade may failed due to old configuration can not be supported on newer version
- FSM7328S: the web GUI is showing unsupported features like OSPF and VRRP

New Features/Enhancements:

- Extend IP ACL rule configuration for including TCP flag field as filtering criteria
- Add Protected Ports Feature