Fixes:
- A security vulnerability related to SSRT101323 has been addressed.
- A security vulnerability related to SSRT101336 has been addressed.
- The iLO ROM-Based Setup Utility (RBSU), which is accessed via F8 at Power On, was reduced in fit in a 64KB size limit.
- iLO allowed some ciphers other than AES/3DES to be used when the AES/3DES Encryption Enforcement Settings were enabled.
- Firmware upgrades were slow or problematic following a failed URL-based/scriptable virtual media floppy drive session.
- A boot issue might occur if embedded media was not ready during POST due to an unexpected power event.
- iLO might crash when the Import Direct DNS Name button is clicked on the Security - Single Sign-On Settings page or when a certificate is imported by using RIBCL.
- Blade servers might hang during POST if a smart component tries to cold-boot the system.
- IPMI transactions to read the power consumption from Power Supplies P/N 499250-201 might report an incorrect value of zero watts.
- CPU overheating messages could be incorrectly detected and logged in the IML and causing iLO to initiate a server shutdown.
- SSH Channel could close unexpectedly after one command is executed.
- SSH interface could lock up after multiple back to back connections.
- A security vulnerability related to SSRT101323 has been addressed.
- A security vulnerability related to SSRT101336 has been addressed.
- The iLO ROM-Based Setup Utility (RBSU), which is accessed via F8 at Power On, was reduced in fit in a 64KB size limit.
- iLO allowed some ciphers other than AES/3DES to be used when the AES/3DES Encryption Enforcement Settings were enabled.
- Firmware upgrades were slow or problematic following a failed URL-based/scriptable virtual media floppy drive session.
- A boot issue might occur if embedded media was not ready during POST due to an unexpected power event.
- iLO might crash when the Import Direct DNS Name button is clicked on the Security - Single Sign-On Settings page or when a certificate is imported by using RIBCL.
- Blade servers might hang during POST if a smart component tries to cold-boot the system.
- IPMI transactions to read the power consumption from Power Supplies P/N 499250-201 might report an incorrect value of zero watts.
- CPU overheating messages could be incorrectly detected and logged in the IML and causing iLO to initiate a server shutdown.
- SSH Channel could close unexpectedly after one command is executed.
- SSH interface could lock up after multiple back to back connections.
- CATEGORY:
- Firmware
- COMPATIBLE WITH:
- Windows 2008
Windows Server 2012 - file size:
- 10.8 MB
- filename:
- cp021803.exe
Other versions
Windows 2008
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.03 64-bit2014-11-12
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.032014-11-12
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.02 64-bit2014-10-06
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.022014-10-06
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.00 64-bit2014-09-09
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.002014-09-09
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.512014-06-24
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.502014-05-12
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.012014-03-13
- Newer! HP ProLiant MicroServer Gen8 iLO 4 Firmware 12014-03-13
Windows Server 2012