D-Link DCS-930 Camera Firmware 1.03B4

Fixes:
- Support for Mac Bonjour Discover Service - Provides the Bonjour On/Off Setting and Bonjour Name Setting.
- Support for APIPA (Automatic Private IP Addressing) used in Bonjour Discover Service when the camera can’t use DHCP to obtain an IP address.
- Fixed: When wireless gets disabled, wireless will be enabled only after wireless site survey.
- Fixed: Change video resolution may cause system hang if someone is live viewing.
- Fixed download firmware crash issue - this occurs when FTP upload is enabled and has a bad FTP server address setting.
- Added “GoAhead WebServer logo” logo on the bottom-right of the home page.
- Added some functions for production test.
- Changed copyright year to 2010-2011.
- Fixed some web pages wording error.
- Upgraded bootcode to version v1.11 (2011-5-31).
- Upgraded mydlink agent to 2.0.05-201104261737
- Support for Firmware Restoration on bootcode when firmware update fails.

Note:

- The Firmware Restoration can only support IE6/7/8.
- When you execute the Firmware Restoration, you must connect the test PC and the camera to a network by isolating the heavy network traffic.
- The Firmware Restoration function is just implemented by a simple program, so we can't guarantee Firmware Restoration will be success every time you execute it.
- You can follow these steps to execute the Firmware Restoration:
I. Connect the camera and the computer to the same network via wired connection
II. If the camera is on, turn it off.
III. Hold down the reset button and then restart the camera, and holding down the reset button for 10 seconds.
IV. Configure the computer’s IP address to 192.168.0.x/255.255.255.0.
V. Launch your web browser.
VI. Enter 192.168.0.20 in the address line of your web browser, and press GO.
VII. A dialogue box will appear. Select your desired firmware file. Click Open.
VIII. Click Update, to update the firmware file to your camera.
IX. Restart the camera to complete the rescue operation.

Caution:

Your camera and computer may not provide an accurate indication of activity. An error screen may appear. This is normal. Please do not click any buttons once the firmware file download process has started. Doing so could disrupt the process, and cause your camera to malfunction. Please be patient. The firmware download process will take 2 to 3 minutes. The process is complete when the LED blinks green.