Intel STCK1A32WFC Compute Stick BIOS 0018

Versions:

- TXE Firmware: 1.1.1.1120
- Framework BIOS Reference Code: Based on 1.1.7
- GOP x32 Driver: 7.2.1008
- GOP x64 Driver: 7.2.1008

IMPORTANT: YOU MUST FIRST UPDATE TO INTERIM BIOS VERSION FC7018

- Copy the two .BIO files - FC7018.BIO and FC0018.BIO - to the root directory of a USB portable device.
- Connect a USB hub (with at least 3 ports) to the USB port on the Intel Compute Stick.
- Connect a USB keyboard and mouse to the USB hub.
- Connect the USB portable device to the USB hub.
- Plug the Intel Compute Stick into an HDMI display.
- Plug power into the Intel Compute Stick. (The Compute Stick will auto power on.)

Step One – update to interim version FC7018

- Press the F7 key when prompted during boot to enter BIOS update mode.
- Select the USB device from the list of devices shown.
- Select to update the BIOS to FC7018.
- The BIOS will update and then reboot.

Step Two – update to current version FC0018

- Press the F7 key when prompted during boot to enter BIOS update mode.
Note: if unable to enter BIOS update mode again via F7, remove power from the Compute Stick, then plug power back in and try again.
- Select the USB device from the list of devices shown.
- Select to update the BIOS to FC0018.
- The BIOS will update and then reboot.
- Press F2 to enter BIOS setup.
- Press F9 to set BIOS defaults.
- Correct the date and time if needed.
- Press F10 to save changes and exit.