14 DAY TRIAL // TRENDnet has recently released firmware version 1.02.32 for its TV-IP302PI (Version v1.0R) network camera. This update adds support for Internet Explorer 11 and fixes the MJPEG video streaming issue.
The update procedure is simple and requires a few easy steps, first of them being to download the TRENDnet TV-IP302PI (Version v1.0R) Network Camera firmware 1.02.32 and extract the archive to an accessible location.
Next, make sure you have saved the camera configuration, as the device will need to be reset to factory defaults after the firmware update.
Go to the camera's IP address (the default is 192.168.10.30) and log in with the username and password (the defaults are “admin” for both fields, although it is strongly recommended you change these).
In the camera's web UI, click the “Tools” tab from the “System” group and, to the right, the “Firmware Upgrade” box will come up. Click on “Browse” and choose the recently extracted update file. When that's done, click the “Upgrade” button and confirm the update in the next window.
After the installation is complete, a message will come up asking you to close the window. Accept it, then reconnect to the camera web UI. Go to the “Tools” tab again and see if the firmware version is 1.02.32.
Get the latest update for TRENDnet's TV-IP302PI (Version v1.0R) network camera, install it, and stay “updated one minute ago.”