Numark NV Firmware Updater 1.06

Numark NV Firmware Update Instructions

Please read these instructions carefully.
- This v1.06 update is not a new firmware update. If you didn’t experience any error messages displayed on your NV screens, please don’t update to this current firmware. This update will rectify the following error messages that are displayed on your NV screens:
ERROR 12: Application Missing. Run Firmware Update Mode – O
ERROR 3: invalid MMA2. Run firmware Update Mode – 2
ERROR 2: invalid MMA1 Run Firmware Update Mode - 1
Boot Loader Init
1. Download the firmware updater.
2. Connect NV to computer powered on.
3. Run the attached updater app.
4. Click “Update Firmware”.
5. Please follow the on-screen instructions exactly as they appear.
6. Power off when prompted to on-screen.
7. Hold down the PLAY and CUE buttons on the left deck while powering on the unit.
8. Press the blinking PLAY button.
9. At this time, the firmware will be erased on both screens. This may take several minutes. Once complete you will be prompted to hit the OK button to start the update process.
Do not unplug or power off the unit during this time.
Once the update is complete, power the unit off, wait 5 seconds, power on and enjoy.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.