Avaya 1603-I IP Phone SIP Firmware 1.3.3

Fixes:

- 1616-I call center phones have almost half the volume (44 db) coming out of the headset as opposed to the handset (71 db).
- 1616i type IP phones have a delay of 2sec to send the RTP to the right port.
- Handset audio improvements (noise/levels/frequency/response/compressor).
- 1603/08/16 handset audio improvements (noise/levels/frequency response/compressor).
- 1608/1616 headset volume is 5dB too quiet. Gains need a balancing for the noise improvements. Fix for the frequency response.
- 1616 non-CR headset gains need adjusting.
- 1616 handset digital gains need corrections for TIA810. Performance 
- 1603 reboots every 10 minutes after receiving HP3800 router MAC 08:2e:5f:68:1f:00
- 1616-I with BM32 continually reboots after a restart of the phone.
- 1616 IP phones with expansion button modules continuously reboots on IPO 500v2 (8.1.43/8.0.44).
- Phone restarts sometimes when receives URQ message.
- 1603 phone freezes.
- Phone is in loop of reboot when setting incorrect L2QVLAN in DHCP.
- 1608 has abnormal lamp behavior.
- 1608-I phones stop working after upgrade.
- Firmware corruption occurs during production.
- Phone reboot due to buffer allocation issue.
- Phone freezes and then reboots. Backup\Restore 
- Compatibility Backup/Restore with IIS7/7.5
- Phone does not prompt the user for new credentials when invalid credentials are entered in case of authenticated Backup/Restore with IIS-7 server
- Backup failed message is displayed on the top line for the first manual backup after the settings are cleared.
- Backup failed when all information is deleted in backup file
- For the first manual backup after reboot, screen changes from backup/restore to screen/sound.
- Phone shows strange characters in screen for entering the credentials when Phone does an automatic restore, if the BRURI points to a child folder in root folder of IIS7. Push
- 16xx phones subscribe to push server when registering in unnamed mode.
- The phone can’t receive audio push (unicast mode) from push server. Application\UI SAGE16XX-638 Redial button doesn't work on the 1616-I IP Phone after upgrading 1.3 SP2 firmware.
- The name getting cropped on the call connected screen of 1608i phone in IPO.
- Call Timer and call log not working.
- The backlight of the phone A isn’t turned off when the idle timer of incoming call on Phone A is equal to the value of BAKLIGHTOFF.
- Phone is displayed ringing status in menu and call log screen after the call is released. Security SAGE16XX-692 Do not allow DEBUG to be invoked unless PROCPSWD is nondefault. BM32 SAGE16XX-693 DND button on BM32 doesn't get activated after reboot.
- Call screening buttons on button module don't get activated after reboot. Network SAGE16XX-676 PC cannot authenticate and access network when connect to PHY2 interface of the phone.
- Phone does not send per hop trace route information under RTCP packet Subtype 5.
- RTCP packets from 16xx phone show erroneously high jitter value.