Sony VPL-VW675ES Projector Firmware 5.003

This utility installs VPL-VW675ES system software version 5.003 and provides the following changes and benefits:

- Adds support for the Hybrid log gamma HDR format
- Adds a feature where the projector will automatically switch to the HLG format when Hybrid log gamma content is received
- Adds a feature where the color and HDR formats being received will be displayed on the Information Page of the on-screen menu

Installation Instructions:

- WARNING! During the update process, do not remove the USB storage device or turn off the projector except when instructed to do so.
- Turn off the projector.
- Make sure no other USB device is connected to the projector before starting the update.
- Insert the USB storage device containing the update folder into USB port of the projector.
- Turn on the projector. The update process will start automatically.
- Note: The ON/STANDBY indicator will blink white during the update process. The update process takes about 15 minutes to complete. Do not turn off the projector or disconnect it from the AC power outlet.
- Once the update is complete, the ON/STANDBY will turn off, and the projector will enter Standby Mode.
- Remove the USB device.
- Turn on the projector.
- Once the projector completely starts and the laser is lit, the update process is complete.
- Check the current firmware version to confirm that the update has successfully installed.

About Projector Packages:

Install this firmware package and projectors can benefit from higher image quality, improved performance and stability, various fixed issues encountered throughout the unit's lifetime, as well as several other changes.

Still, if you wish to apply this release, it would be best if you first read and understand the installations procedure; also, perform this task using a fully-charged battery or in a steady power environment (such as the one ensured by a UPS unit), and only after you have familiarized yourself with the update steps.

Bear in mind that, while the firmware is upgrading, it isn't recommended to use the projector's buttons, or interrupt the process in any way; doing so can cause serious malfunctions to the device and might even render it unusable.

That being said, if you intend to update to this release, click the download button, get the package and update the firmware version. If not, check back with our website as often as possible so that you don't miss the update that will boost the performance of your projector.