Panasonic AJ-CX4000GJ Camcorder Firmware 5.01

4K Live streaming

- When the file format is set to 4K(MOV) formats, the 4K streaming function can be used.
- RTMP/RTMPS (H.264), SRT(H.264, H.265) and RTSP/RTP(H.264, H.265) have been supported. In particular SRT live streaming is supported. SRT live streaming is available in both client and listener modes.

Cloud service "MediaBridge" related functions

- Remote operation to start the streaming
- Uploading of the contents to MediaBridge or other servers
- Confirming the device status
- Addition of the camera metadata
- Import/export of the setup file
- Remote updating the camera firmware

Clip Metadata

- You can set items such as name, shooting location, and text memo as the clip metadata.
- The metadata can be loaded from the SD card set in the P2Viewer application software. It can be set also from Media Bridge and CX ROP.
- The set items can be recorded in both P2 / MOV formats and can be displayed as metadata.

AVC-G6 proxy recording of P2 format

- The P2 recording of this camera can simultaneously record AVC‑G6 format different from the main material recording as a proxy data.
- When you use the following settings, you cannot use proxy recording: File Format : MOV or AVCHD, REC Format: AVC-G12, NDI|HX, STREAMING or 4K STREAMING settings, VFR recording, INTERVAL/SIMUL/BACKGR recording, TIME STAMP recording,

SHOT MARK (P2 format)

- You can view and play only clips with SHOT MARK added, or upload them to "MediaBridge".
- SHOT MARK can be added using the user button during recording, immediately after recording, or on the playback thumbnail screen.

SD Card P2 recording function (P2 format: excluding AG-CX200MC)

- When the recording mode is P2, SDXC memory cards can be used.
- (Tested SD card: ProGrade products - Video Speed Class V90 or higher)
- Related Menu:VIDEO OUT/LCD/VF > INDICATOR >
- SD CARD WARNING: ON/OFF
- Toggles whether to display the warning
- when an SD card is inserted while [FILE FORMAT] is set to [P2].

Improvements:

- When you use a specific SD card whose writing speed is not stable in MOV recording, [CARD ERROR] may occur during recording. The internal processing has been optimized so that the recording operation can be continued.
- The video may stop when the normally recorded clip is played again immediately after rewound-playback. The internal processing related to playback has been improved.

Update procedure:

- Turn the power on. Set the MODE SW to RECORDING side.
- Insert the SD memory card into the SD memory card slot 1.
- Press the MENU button to display the setting menu.
- Select the item “UPDATE” on the MAINTENANCE menu. (Touch “UPDATE”.)
- It takes a few seconds to check the file. While checking it, the message “Please wait.” is displayed. If the update can be executed, the versions of the camera recorder and the update file on the SD card are displayed.
- Select the “ENTER” button. (Touch the “ENTER” button.)
- The update confirmation screen is displayed. When “YES” is selected, the update process will start. (Touch the “YES” button.) When “NO” is selected, the screen will return to the OTHER FUNCTION menu screen.
- The progress bar appears in LCD screen when shifting to the update processing.
- Software update takes approx. 1 to 2min. Do not power down while updating.
- When the update is completed, the power automatically turns OFF / ON and the message “Update is completed.” is displayed. After the power is ON again, Status indicator is ON.
- Select the “OK” button. (Touch the “OK” button.) The normal “Recording” mode screen is displayed.  

About Camcorders Updates:

Upgrading your camcorder to a different firmware version should improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camcorder's firmware can recover its functionality in the unlikely event that the currently installed version is faulty or the device's performance dropped after an upgrade. However, you should bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camcorder's firmware be carefully performed by a power user, but the process can also be initiated by a regular user at his or her own risk. Whichever the case, this step should be taken only when absolutely necessary.

When it comes to updating the device, make sure that you have saved all your personal data and configurations before initiating the process, and that the battery is fully charged. You're not to use the unit's buttons while the installation is in progress either.

As for the update method, most of the times, you're supposed to copy the firmware file onto a suitable memory card, insert it into the camcorder, and start the upgrade from the device's update section menu.

Still, each device has specific steps for a successful upgrade and various ways to enter update mode, which means that, before you set off to work, you must carefully read and understand the product's installation guide.

With this in mind, if you consider installing this firmware, click on the download button, get the desired version, and apply it to the device; if not, check with our website as often as possible so that you don't miss the update that will boost your camcorder's performance.