Nikon Z 7 Camera Firmware 3.00

Changes:

- Added support for ProGrade and Lexar CFexpress memory cards (Type B). For more information, see the Nikon website for your country or region.
- Custom Setting a4 (Auto-area AF face/eye detection) now offers an Animal detection option that adds dogs and cats to the subjects supported by face- and eye-detection autofocus. As a result, the camera can now detect and focus on the faces and eyes of dogs and cats. Animal face detection (but not eye detection) is also available in movie mode.
- Custom Setting f2 (Custom control assignment) in Group f (Controls) of the CUSTOM SETTING MENU now offers a Lens Fn2 button option, which can be used to choose the role played by the L-Fn2 button available on certain Z mount lenses (as of February 12, 2020, only the NIKKOR Z 70–200mm f/2.8 VR S).
- Added support for the focus limit switch available on certain Z mount lenses (as of February 12, 2020, only the NIKKOR Z 70–200mm f/2.8 VR S).
- Optimized the responsiveness of the switch to manual focus when the focus or control ring on a Z mount lens is rotated during autofocus. Note that the control ring only functions in this capacity when assigned the Focus (M/A) role.

Improved the functionality of subject-tracking AF (available when Auto-area AF is selected for AF-area mode) as follows:

- Subject-tracking AF can now be initiated via the Fn1 or Fn2 button on the camera or the Fn1 or Fn2 button on the lens. Subject-tracking AF must first be assigned to the control using Custom Setting f2 (Custom control assignment) in Group f (Controls) of the CUSTOM SETTING MENU or Custom Setting g2 (Custom control assignment).
- The behavior of the camera when tracking is end by pressing the AF-ON button or by pressing the shutter-release button halfway with AF-C (continuous-servo autofocus) and subject-tracking AF enabled in photo mode has been changed to more closely resemble that of the 3D-tracking option for digital SLR cameras.

Fixed the following issues:

- When Viewfinder brightness was adjusted manually, brightness would sometimes change when the standby timer was restarted.
- iOS devices running iOS 13 would sometimes display a Bluetooth pairing request when pairing was complete.
- Horizontal lines would sometimes appear in photographs.

Note:

- For information on the license for the open-source software included in the camera’s NVM Express driver, see “BSD License (NVM Express Driver)”.

Viewing the Camera Firmware Version:

- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.
- Download the file to the folder newly-created.
- Extract the file to a folder named “Z7Update”
- Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.