Nikon Z 5 Camera Firmware 1.40

Manufacturer:

Description

DOWNLOAD NOW

Changes:

- Added support for the iOS version of NX MobileAir. Use NX MobileAir version 1.0.4 or later.
- Added support for MC-N10 remote grips.
- Added support for ML-L7 remote controls.
- Eye-detection AF is now available during video recording.
- [Save focus position] and [Recall focus position] have been added to the roles that can be assigned using Custom Setting f2 [Custom controls] in the [CUSTOM SETTING MENU].
- Improved eye-detection performance for [Auto-area AF].
- Improved the refresh rate for the focus points displayed in live view during subject-tracking and face/eye-detection AF.
- The behavior of autofocus during memory recall has been improved to ensure that the focus position will not change in any focus mode even if the shutter-release button is pressed halfway while focus recall is in progress.
- Fixed an issue that sometimes caused the camera to stop responding when [Auto] was selected for [Set Picture Control] in the [PHOTO SHOOTING MENU].

As of February 14, 2023, these options were supported with the following lenses:

- NIKKOR Z 70-200mm f/2.8 VR S
- NIKKOR Z 100-400mm f/4.5-5.6 VR S
- NIKKOR Z 400mm f/2.8 TC VR S
- NIKKOR Z 400mm f/4.5 VR S
- NIKKOR Z 800mm f/6.3 VR S

Viewing the Camera Firmware Version:

- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.
- Download the file to the folder newly-created.
- Extract the file to a folder named “Z5Update”
- Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
- Note: For detailed instructions or information on the equipment needed to complete the update, download the following pdf file: Z-series_FirmUp_Win_En.pdf

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

Nikon Z 5 Firmware Z 5 Camera Firmware Nikon Z 5 4K UHD Camera Firmware Z 5 Firmware Nikon Camera

  CATEGORY:
Digital Camera / Webcam / Camcorder
  COMPATIBLE WITH:
Windows 8.1
Windows 8.1 64 bit
Windows 10
Windows 10 64 bit
Windows 11
  file size:
29.2 MB
  filename:
F-Z5-V140W.exe