Nikon WR-1 Wireless Remote Firmware 1.02

Changes:

- Added support for the Z 7 and Z 6.

WR-1 firmware updates can be performed with:

- Z 7 and Z 6 cameras
- D5, D4S, D4, Df, D850, D810A, D810, D800, D800E, and D750 cameras
- D500, D7500, D7200, and D7100 cameras
- Other cameras cannot be used to upgrade WR-1 firmware.
- Firmware upgrades can be performed for you by a Nikon-authorized service representative.

Viewing the WR-1 Firmware Version

On the Camera
- Attach the WR-1 to the camera and slide the Tx/Rx/OFF switch to Rx.
- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU.
- Check the WR-1 firmware version (“W”).
- Turn the camera off.

On the WR-1
- Slide the Tx/Rx/OFF switch to Tx or Rx.
- Press MENU and highlight VERSION using the multi selector.
- Check the firmware version.
- Slide the Tx/Rx/OFF switch to OFF.

Updating the Firmware:

- Create a folder on the computer hard disk and name it as desired.
- Download the file to the folder created.
- Run the package to extract the following folder named “WR1Update”.
- Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.
- After attaching the WR-1, insert the memory card into Slot 1 on the camera, turn the camera on, and slide the WR-1 Tx/Rx/OFF switch to Rx.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.