Convergent Design Odyssey7Q Recorder Firmware 1.11.100

Zoom Memory:

- When using Pixel Zoom, the screen coordinates in 1:1 and 2:1 zoom modes are remembered from previous use.
- Drag with finger on OLED display to position zoom window.
- Window will return to same position upon returning to Pixel Zoom setting.
- Reset zoom window to center by tapping frame reference map in lower right corner.
- Coordinates retained until changing record mode or powering down Odyssey7Q.

Multi-Stream:

- Multi-Stream interface updated with A/B/C/D input selector buttons.
- Multi-Stream initializes in Quad Split view (display divided into four separate images).
- Tap A, B, C, or D buttons to select a single input for full screen display.
- Inputs can be directly switched to by selecting the corresponding button without need to scan through other inputs.
- To return to Quad Split view, tap on the currently selected input to deselect it.

Sony FS700 Record Option - K2HD in REC709 (800%):

- FS700 4K -> HD ProRes (4K2HD)
- Added support for REC709 (800%) gamma setting.
- On FS700, in Picture Profile menu, select a PP with Gamma set to ITU709(800%).
- This setting increases Dynamic Range in highlights by three stops.

Sony FS700 Record Option - 4K2HD LUTs:

- Added LUT function in 4K2HD mode.
- If S-LOG2 or REC709 (800%) is selected as camera gamma, tapping LUT button applies a LUT to adjust viewed image to a standard REC709 without altering the recording.
- LUT is applied to the OLED display as well as SDI and HDMI outputs.

Fixes & Improvements:

General:

- Menu setting Menu » outputs » Monitoring changed to Overlays to more accurately reflect function. On/off setting enables/disables image analysis tools such as Waveform and False Color to output over video signal to SDI and HDMI outputs.
- Waveform and Histogram markers remain available during recording

Multi-Stream:

- Fixed support for PSF input signals (1080psf 23.976/24/25/29.97)

Prores(HQ):

- Reduced extremely rare file corruption occurrence on particular units. Error only occurs after more than one hour of continuous recording and even then it is a rare event.
- HDMI input expanded from legalized to full range
- Fixed “Variframe mode detected” compatibility issue with Canon C300

4K2HD:

- Reduced color fringing at high contrast edges
- Reduced noise in dark areas

Apple ProRes(HQ) & 4K2HD:

- Fixed multiple file playback
- Fixed audio channel flipping between ProRes files within a clip
- Fixed end of clip playback freeze of ProRes files
- Fixed playback shift on Odyssey7Q
- Fixed Timecode accuracy on file transitions within a clipdpx
- Fixed end of clip playback issues