Ubiquiti UAP-AC-LR Access Point Firmware 6.0.15

Improvements:

- [Gen4/Gen5] Improve overall stability.
- [Common] Ensure devices can reliably reach the Network Application after losing connectivity temporarily. This also resolves high CPU usage reported by some users.
- [Common] Update regulatory data for Bahrain to align with country requirements.

Bug Fixes:

- [UAP-Gen6] Resolve issues with upgrading the AP, requiring a manual power cycle and SSH upgrade. Please note that this fix will apply when updating from 6.0.15. It is possible to experience the bug when upgrading to 6.0.15 from affected versions.
- [UAP-Gen2/3/4/5] Fix multicast issues affecting IoT device interoperability.
- [UAP-Gen5] Fix 5GHz radio not broadcasting after a DFS hit when bandwidth is set to HE160.
- [UAP-Gen4] Resolve throughput issues with Samsung A-series devices.
- [UAP-Gen2] Fix reboot loop when the same VLAN ID is used for management and WLAN. This should resolve the reboot loops certain users were experiencing right after upgrading.
- [UAP-Gen2] Fix iOS connectivity issues that primarily occurred in networks with wireless uplinks (associated with `ol_txrx_ast_find_hash_remove` in the logs).
- [Common] Fix firmware version being incorrectly reported as 6.0.123 occasionally.

Additional information:

- U6-Pro/Mesh needs to be upgraded to 5.67.0 first before upgrading to 5.68.0+.
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
- All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.