Ubiquiti UAP-AC-LR Access Point Firmware 6.0.12

Improvements:

- [UAP-Gen2/Gen3] Add Lock to AP support.
- [UAP-Gen2/Gen3] Improve wireless uplink stability.
- [UAP-Gen2/Gen3] Improve overall stability by resolving several kernel crashes.
- [UAP-Gen2/Gen3] Update regulatory data for Indonesia, Philippines, and Qatar to align with country requirements.
- [UAP-Gen2/Gen3] Improve the provisioning experience by applying more settings in the background without taking WiFi down.
- [UAP-Gen2/Gen3] Improve NTP sync.
- [UAP-Gen2/Gen3] Improve WPA3 and WPA2/3 (transition mode) compatibility with clients.
- [UAP-Gen2/Gen3] Improve topology reporting when wireless uplink is involved.

Bugfixes:

- [UAP-Gen2/Gen3] Fix an issue where 5GHz WLANs won't come up when going from a wireless uplink to a wired uplink.
- [UAP-Gen2] Fix DHCP issues with Proxy ARP enabled.
- [UAP-Gen2/Gen3] Fix intermittent instability with Proxy ARP enabled.

Additional information:

- Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.
- Please refer to this article to find more details on how to identify your Access Point generation.
- Your device built-in display may turn black or unresponsive for ~10 minutes after firmware upgrades to upgrade LCM firmware.
- All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device's date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can't reach a NTP server).

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.