TRENDnet TPE-4840WS v1.0R Switch Firmware 1.00.10

Changes:

- Fixed PoE auto detection classification with some access points including TEW-826DAP.
- Fixed PoE manual mode function by properly disabling two event handlers.
- Added ability to specify port description.
- Modified maximum length from 12 to 20 alphanumeric characters.
- Fixed issue logging into the switch management GUI page after firmware upgrade.
- Fixed issue changing switch IP address to other class B IP addresses other than 172.16.x.x/16.
- Added IGMP fast leave to IGMP snooping settings.

Firmware Upgrade Procedure

- Save the downloaded firmware file (.zip) to your PC
- Right click on the downloaded file and select Extract All or Extract Here option
- Make sure to remember the location where the extracted file will be saved.
- Log into to the router’s configuration page
- Navigate to the Tools section, click on Firmware Upgrade and select the via HTTP option.
- Click Browse and select firmware file (.hex) from the extracted files and click the Apply button to start the firmware upgrade process.
- Wait until the firmware upload has completed and the device reboots.
- The firmware upgrade is complete. 

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.